Search: panasonic
Results: 2911
Make Model Symptom Problem Solution By
PANASONIC Z4 CHASSIS
Slight tuning drift, no sound, no vol osd (other osd ok) Insufficient sync drive to q1272 base. c524 180pf connected to pin 14 ic521 leaky
PANASONIC Z4 CHASSIS
No video with faint unsync lines in background Sync pulses leaving pin14 ic521 poor - 180pf cap connected to this pin leaky
PANASONIC Z4 CHASSIS
No sync Comes from txt board where ic3507 mab8461-pw216 was faulty (dis pins 2 & 3 to check)
PANASONIC Z4 CHASSIS
No sound and half a pic (shifted over) C503 0µ01 cap across line shift control leaky
PANASONIC Z4 CHASSIS
Letter "c" displayed towards left/centre of screen Reset micro by pressing vol- button on tv whilst pressing timer button on hset - oks then displayed
PANASONIC Z4 CHASSIS
Int loss of sound Check conns to speakers
PANASONIC Z4 CHASSIS
Field int collapses or rolls C402 3µ3 tant cap in field osc stage
PANASONIC Z4 CHASSIS
Dead after initial burst of life Trips even with lop stage dis'd - fault in prot cct - q558 2sa879 faulty tho checked ok out of cct
PANASONIC Z4 CHASSIS
Dead - surge lim res r802 4r7 5w o/c Str54041m ic801 & q801/2 s/c & d854 overvolts prot diode s/c. c809 0µ1feedback cap was the cause (caused excessive ht) also change c808 10µ 63v
PANASONIC Z4 CHASSIS
Dead - blank raster when optocoupler overridden No activity from main micro - ic1202 eeprom st24c02a faulty
PANASONIC Z4 CHASSIS
Comes on with field collapse - gradually opens up then int shuts down C462 470pf ceramic cap leaky in fop cct
PANASONIC Z4 CHASSIS
Col int low or absent C2651 0µ01 sm int o/c
PANASONIC Z4 CHASSIS
Bright green at sw on and it cuts out C350 on crt base
PANASONIC Z4
Tuning drift - sound muted. C524 ( 180pf ) leaky.
PANASONIC Z4
Tuning drift no sound no sound osd Q1272 3 4 or more likely c524 180pf
PANASONIC Z4
Tuning drift Tuner unit
PANASONIC Z4
Switches on but dies Qhd Asqqah
PANASONIC Z4
Strange faults. Reprograme microcomputer see tv mag.
PANASONIC Z4
Stores one channel in all locations Eprom (ic1202)24co2ab1
PANASONIC Z4
Stations tuned to one position already holding tu Check around text pcb link j10 etc