Search: philco
Results: 4775
Make Model Symptom Problem Solution By
PHILCO PCM1446 PCM2046
Turns on and off after a while Check r716 (100k) Sequeira
PHILCO PCM1446 PCM2046
Turn on and off Check r713 (100k) Sequeira
PHILCO PCM1446 PCM2046
Vertical closed Check diode 302 Sequeira
PHILCO PCM1446 PCM2046
Don't tune in Check c208 Sequeira
PHILCO PCM1446 PCM2046
TV disarming Check diode 302 Sequeira
PHILCO PCM1446 PCM2046
Low power supply with 35v Check str50103 Sequeira
PHILCO PCM1446 PCM2046
Image without red Check zd503 Sequeira
PHILCO PCM1446 PCM2046
Contrast does not work Check c716 Sequeira
PHILCO PCM1446 PCM2046
White screen with scratches and no image Check c719 Sequeira
PHILCO PH145
Turns on for a while and turns off with the LED off. Q6 and q7 d2 and d3 do not measure change (mpg plate) Giovanne miguel pereira
PHILCO PCM2044
The image and the standby LED pulsing directly. I changed r713 and the problem was solved. HLM SOLUÇÕES ELETROTÉCNICAS
PHILCO PCM1446
No color C118shorted edezio eletronica
PHILCO PCH1444
No sync Replace c 205 ,1 x 50v This email address is being protected from spambots. You need JavaScript enabled to view it.
PHILCO PH 29 US A2
A2
Closed bottom vertical Cold welding no vd 564 Resolve Andre
PHILCO PCS2700
TV doesn't work, c913 = 470pf shorted disk killed the power supply, after changing the TV it worked, but there was no (osd) that is menu characters on the screen (cause c612 = 10mf for 50v. no capacity). which sends a pulse to pin 2 of the micro. Causes c913=470pf which killed the + b and c 612=10uf for 50 v. Both capacitors were replaced and it was ok. Armando de Olimpia,Eletronica EvoluSom.
PHILCO TP-2052N
I got this TV with a shorted horz.bu2506dx output, I put in a monitor output, I noticed it was getting a little hotter, but I handed it in after 3 days. It didn't generate a problem, I'm going to put it to work even if it explodes or shows me on the screen where the problem is, there was 50vlts on the q 920 so I closed the emitter collector it worked but the horizontal one kept closing I thought it was a polyester capacitor because I had changed the bust and the output It was getting too hot so I took the super magnifying glass that was leaving me lol then I saw a subtle cold weld on the horiz.t702 trafo and that was the problem Cold solder with yellow transformer New welding done astel eletronica sousa jurema ceara
PHILCO DVD PHT660/N
Doesn't start Secondary power supplys with low voltages Capacitor e11 47 mf exhausted CALIXSERVICE
PHILCO TP1452
1452
Normal league has sound and no image Cause it was r812 there was cold soldering it was soldering and the image appears on the TV alex
PHILCO TV PH21C VERSãO B
Does not turn on stand by off Q881 (2n5551) short and r881 (100r) open Replace alvaro peralta
PHILCO PCS2700 2900 E CPH05
No writing (OSD) No vertical pulse on pin 2 of the micro C612 10mf, or r612 10k open jasvan souza