Philco Repair Tips
Search: philco
Results: 4838
Results: 4838
Make | Model | Symptom | Problem | Solution | By |
---|---|---|---|---|---|
PHILCO |
TPF-29S4F
|
Horizontal with black bands on the side | Check welds, d1702 | Rio Mayer | |
PHILCO |
TPF-29S4F
|
TV doesn't turn on, LED is on | R919 open | João Antunes | |
PHILCO |
PCM-2044
|
High power supply, goes into protection | S1 | ||
PHILCO |
PCM-1444
|
Fountain pulsing with retrace on screen | R715 of 1r5 open | ||
PHILCO |
PC-1445
|
Str50103 burned, inoperative | In addition to replacing str50103 check electrolytic cap c908 10uf50v, c708 47uf25v | ||
PHILCO |
PCM-2044
|
Dead | R908 | ||
PHILCO |
PCS-2952
|
Turning on and off | R912 - 2k2 | ||
PHILCO |
TP-2052
|
Power supply oscillates, tries to start and falls | Loose chopper core | ||
PHILCO |
TP-2054
|
Flashing image | A rabble | ||
PHILCO |
PCS-2700
|
White stripes, turns off intermittently | Verficiar r715 e c718 | ||
PHILCO |
TPC-2910
|
Doesn't start | Check ic501, tl431 | ||
PHILCO |
PCM-1446
|
Doesn't start | Verificar saldo c911 | ||
PHILCO |
PC-2142
|
Doesn't start | Priapism | ||
PHILCO |
TP-2053
|
Blue stripe at the top | Smd c821 | ||
PHILCO |
PCM-2046
|
When turned on there is no synchronization, after a few minutes it normalizes | C722 | ||
PHILCO |
TP-2054
|
Burns the tda16846 power supply ci | Check the capacitor c938 220nf and the zener diode zd 904 12v | ||
PHILCO |
PCM-2046
|
Dark image | C116 -> 470k | ||
PHILCO |
PCS-2950
|
No characters | Coil l-1103 remove the two capacitors from inside and place two 47pf capacitors and then just adjust the coil to center the characters. | ||
PHILCO |
CPH05
CPH05 |
Intermittent operation | Check tracks(tracks) under resistor r708 | ||
PHILCO |
PCM2051
|
Turns off by itself | Zener zd941 |