Philips Repair Tips
Search: philips
Results: 14231
Results: 14231
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| PHILIPS |
20PT4331
|
Nothing works | It wouldn't turn on and after operation tsound was no height. | Replace of ci 7520 and vertical 2465 capacitor | lou |
| PHILIPS |
21PT
|
Sound takes a while to come on when you turn on the TV | Capacitor 2444 /470 nf 16 v. | Replace the same | dan levita |
| CCE E PHILIPS |
HPS , PT E FWM
|
TVs that turn on and off all the time, or take a long time to turn on, when changing bcs 337 and 327, replace them with bd135 and 136, only respecting the correct position of the pins | It won't come back with this defect. | Help yourself, post your tips sound. | ÁdrianChapadãodoCéu |
| PHILIPS |
21P8467C
|
No color in the channels but tsound is color in av | Memory | marcelo marques | |
| PHILIPS |
29PT4635
|
Alloy with width flaw | Changing the cap width, even measuring good. | marcelo marques | |
| PHILIPS |
14PT316A/78
|
When we turn on the TV it threatens to work by making a -tsssss, and only the LED stays on | 18k resistor in position 3470 | CACER69 | |
| PHILIPS |
20PT-3331
|
Turning off | Memory | Rewrite memory | Fábio Andrade |
| PHILIPS |
21PT8467
|
Vertical closed halfway to the bottom of the screen | Memory 24c16 | Domingos da Eletronica | |
| PHILIPS |
20CT-16CT 14CT
CTO |
It takes a while for the shine to come | +12v electrolytics coming from the fly exhausted | jasvan souza | |
| PHILIPS |
20CT-16CT 14CT
CTO |
White screen, no sound and no image | No voltage on pin 14 of the tda2541 | C147 from 2k7, turn it off for testing, if it works, replace it | jasvan souza |
| PHILIPS |
20PT3331
|
Vertical closed at the top of the screen more or less 4 fingers (voltage on the bd135 collector 40volts) normal is 20v. | Electrolytic Capacitor C2465 Headless (10mF/160) | ||
| PHILIPS |
25PT5536/78R
LO1L1{2K2} |
It doesn't gun and it's whining r3488 exit from the vertical | If you connect the TV with the horizontal coil wires turned on, it starts to oscillate and the r3488 which goes +b ci8359j .. | nilsonfonseca | |
| PHILIPS |
29PT558A78
L1 1L |
Horizontal strip in the middle of the screen two fingers wide | Weapon protection | Replace c2462 de popipropileno n33k63 k=10% j=5% | DILMARIO |
| TV - PHILIPS |
20PT123A/78R
|
Black and white image | Solution: check crystal: 3,575,611, if ok!. replace or reprogram memory - 24w04 - 1 | BARRETO CRUZ | |
| TV PHILIPS |
20PT123A/78R
|
The stand by LED lights up and does not turn on. When you press the channel key, it flashes 3 to 5 times, stops and remains lit. and doesn't start | Solution: change the flayback - ov 2094/41 | BARRETO CRUZ | |
| PHILIPS |
33PT670A/78
|
Increased brightness and disarming | The brightness of the TV increases and decreases, when it increases too much the retrace lines and disarms, like if the screm increases too much. The defect is the capacitor c55 that goes to the screm on the RGB board | Replace c 55 | ELETRÔNICA DO RICARDO CAETÉ MG |
| PHILIPS |
20GX1656
|
Vertical partially closed about 10cm at the bottom and top | Capacitor 2404 2200x25 | Replace the capacitor and also scrape off some glue between the surrounding components | celito santo angelo |
| PHILIPS LCD |
32PFL3605D
|
TV doesn't turn on, it came with a blown fuse! | To replace: diodes d210 sb3200, d510 uf4007; q501 fet fqpf6n80c; ci. 1207a - smd; fuse. | GEMASI | |
| PHILIPS |
25PT5536/78R
L01LAC |
Gueimando r3488 | When it turns on, it doesn't arm and turns off | nilson soares fonseca | |
| PHILIPS |
29GX1899
|
Colored lines at the top of the screen | Rewrite the epron data error | simas433 |