Search: philips
Results: 14206
Make Model Symptom Problem Solution By
PHILIPS 21PT9467/78
SK4-1L
When turned on, it triggers protection Filter capacitors c628, c630. CACER69
PHILIPS FW M377
I'm sound Sem st-by 1v5= 0v em pino 13 d0 stk403 Q727 bc556 e r795 22k smd replace vitaltec
PHILIPS 29PT554A/78R
HC070263
It turns back on to standby, sometimes it turns on with a white stripe and RGB lines at the top, sometimes it turns on with a small image in the center of the screen, or it turns on with a white globe in the center and turns off when tapped on the board... I resoldered the ci7401 it seemed to be well soldered BOBY
PHILIPS 29PT5642
Turning off with banner at the bottom of the screen C2242 100nf change without measuring SIDNEY ALVES
PHILIPS 14PT3131/78R
Low power supply with 70v at the +b of the secondary Leaky coupler photo Replaced the photo coupler (solved) JOANILDO SILVA
PHILIPS 20PT3336/78
Tv inoperative R 3355 proximo ao flay
PHILIPS LX600
-
Doesn't work Without the power supply ics Roberval Almeida
PHILIPS 29PT9467C/78
Vertical line at the top of the screen D450 shorted, r452 2.2Ω open. Evandro Estrela
PHILIPS 42 PFL 3403/78
When you turn it off, tsound is sound T. 701 Resoldalo Vicena
PHILIPS FW-D798
The STB LED lights up and then goes out Power supply d-909 diode shorted Replace and resolve ELETRONICA NISSEI SOUND embu-sp
PHILIPS 29PT5642
Vertical closed but with little width and whistle coming from the flyback Damaged fuse 1452 Replace it without measuring BOMTEMPO MECATRÔNIC
PHILIPS 14GL1015/78R
Stop, wsound at the power supply output tsound should be 70 volts tsound is 9 volts Transistor 7508 in short and cynoscopio with cracks and sparks in the valve under the deflector Replace the but 12 af transistor and the image kinescope Domingos
PHILIPS 15GL1015
Does not turn on low voltage at the 51 volt power supply output Transistor 7508 (but 12 af) shorted and broken tube valve and spark near the deflector Replace the transistor and image kinescope Domingos
PHILIPS 29GX1898/78R
Power supply voltage vo around 30v Capacitor 2531 (47uf/200v) aberto Replace it to eliminate the power supply ripple and the voltage will go to 130 volts (vo) Domingos
PHILIPS 29PT4635
Turns on and before the image appears you hear a noise coming from the horizontal oscillator area and it turns off when you press the channel button, it threatens to turn on and stops again Smd diode 6467 bas216 with small leakage and q7450 with leakage(pdta114et After the replace, the TV started working normally again JOSÉ GUSMÃO
PHILIPS 20PT4331
Nothing works It wouldn't turn on and after operation tsound was no height. Replace of ci 7520 and vertical 2465 capacitor lou
PHILIPS 21PT
Sound takes a while to come on when you turn on the TV Capacitor 2444 /470 nf 16 v. Replace the same dan levita
CCE E PHILIPS HPS , PT E FWM
TVs that turn on and off all the time, or take a long time to turn on, when changing bcs 337 and 327, replace them with bd135 and 136, only respecting the correct position of the pins It won't come back with this defect. Help yourself, post your tips sound. ÁdrianChapadãodoCéu
PHILIPS 21P8467C
No color in the channels but tsound is color in av Memory marcelo marques
PHILIPS 29PT4635
Alloy with width flaw Changing the cap width, even measuring good. marcelo marques