Philips Repair Tips
Search: philips
Results: 14231
Results: 14231
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| PHILIPS |
14PT - 3131/78
|
Vertical closing at the top of the screen | Solution: change c - 2444(470uf/16v) c - 2446(470uf/16v) c- 2465(10uf/160v) | ||
| PHILIPS |
29PT5642
|
TV turns off by itself, sometimes it takes a while to turn off. | Cold solder on the flay-back pin that is connected to ground. | Soldered and ready. | Armando,EletrnicaEvoluSom. |
| PHILIPS |
29PT5645
L0401L |
The power is high but the filament does not turn on, in 5 seconds it turns off | Shorted tube | Replace the tube | cleberlima |
| PHILIPS |
21PT5433/78R
|
Turns on with the image a little blurry and then immediately. | I changed the socket, it improved but the image continued with blurred colors and kept turning off, so I checked that the filament voltage was low, I changed the r3444 and r3443 and it returned to normal. | Replace r3444 and r3443 and check 2444 | dodim |
| PHILIPS |
14PT316A
|
Doesn't start | Change fly back, it turned on but with a hoarse sound, also change potentiometer 3540 adjustment +b leave the adjustment at 95 volts... | pfa | |
| PHILIPS |
29PT4635
|
Doesn't start | Shorted horizontal output transistor c4455 47mf exhausted | Replace horizontal output transistor and c2455 | juci |
| PHILIPS |
20PT3331
|
Dead | Bul 312 | preá | |
| PHILIPS |
14PT4131
|
Stretched image when adjusted in service mode and turned off to store but stretched back | Replace epron 24c16wp | macedo domingos | |
| PHILIPS |
14PT112A
|
TV turns on in drizzle without OSD keys stuck does not accept remote control commands | R3677 connected to pin 33 of the micro | Replace r3677 | Roberto Consertos |
| PHILIPS |
20GX1555
ANUBIS |
Appears on the screen written next to the channel number | Press the channel and volume keys together to darken the screen and disappear the writing on the screen | Volume plus and channel minus or vice versa that disappears | ELETRONICA MAURI JUNIOR |
| PHILIPS |
20GX1555
ANUBIS |
Won't turn on without power supply | Replace c2516- c2506 | C2516 4,7x100v c2506 47x100v | ELETRONICA MAURI JUNIOR |
| PHILIPS |
20GL1044
GR1-VA |
No OSD, normal sound, no image. | The user had entered the installation menu and set all commands (brightness, contrast, color...) to minimum. To be able to restore, just randomly press the menu (hold down) and volume + keys. | littlecarlos | |
| PHILIPS |
29GX1899
|
Does not turn on low power supply | Replace capacitore 47x160v 100x200v | 47x160v 100x200v | ELETRONICA MAURI JUNIOR |
| PHILIPS |
25PT5541/78
|
Tic tic at the power supply and the LED doesn't even blink | T 7512 open | I put the 2sk2545 in and it was fine. | ÁdrianChapadãodoCéu |
| PHILIPS |
21PT9467C/78
|
Normal sound dark screen | C508 screen on the tube board. | Just replace | Pioneer Eletronica |
| PHILIPS |
PLCD170PS09
|
Lamps do not light.tsc432 burnt.replacement with bc640 | Tsc432 = bc640 | christos | |
| PHILIPS |
29PT4631
|
Blurred image and turns off | 6332 diode near the ic tda 6107 leaky diode | MACCELETRONICA | |
| PHILIPS |
14PT316A
L9.2A |
Ñ league | Ci mc44603ap | Replace | PIMENTEL |
| PHILIPS |
20PT122
|
Defect does not turn on | Saida horizontal | fernando | |
| PHILIPS |
14GL1015
|
Without the menu | Cold cold nos. | Resolder | EletroClaudio Aguas Belas |