Philips Repair Tips
Search: philips
Results: 14210
Results: 14210
Make | Model | Symptom | Problem | Solution | By |
---|---|---|---|---|---|
PHILIPS |
14GL1015
|
LED lights up but does not oscillate horizontally power supply +b normal | Cold solder em t 7502 | Macsom | |
PHILIPS |
20GL1049/78
|
Lack of height (+- 3cm top and bottom) | R 3426 (amended) | krul | |
PHILIPS |
20PT220
|
Sem osd | Replace q-7682 | Ademar / Videira sc | |
PHILIPS |
20PT3331
|
Turns off after approximately 5 minutes | Swap (q-7643) bc-546 can be used bc-547 | Ademar / Videira sc | |
PHILIPS |
20PT3336
|
With characters but without image and brightness. | Change the resistors (r-3442 and r-3459) values of 100k each | Ademar / Videira sc | |
PHILIPS |
3331 LINHA PT
|
Reduced frame | +b only with 68 volts on the secondary, replace the r-3526 connected to the power supply fet (0.15 r replace and do not measure) | Ademar / Videira sc | |
PHILIPS |
1340
|
Green screen with lines | Replace diode zd-359 value of 3.9 volts | Ademar / Videira sc | |
PHILIPS |
TODOS LINHA PT
L-04 |
Shutting down with error 11 | Change coupler photo | Ademar / Videira sc | |
PHILIPS |
TODA LINHA GR-1
|
Jagged image | Replace 18k r-3226 resistor | Ademar / Videira sc | |
PHILIPS |
21PT9467C/78
|
Burns ic 601 | C609 open | Replace c609 and ic601 | Gabriel GXP |
PHILIPS |
20PT228A
|
Vertical black lines | R-3477-open | Replace | LUCIANO |
PHILIPS |
GX VARIOS
|
When you randomly enter messages | Ground pin 20 on the computer, turn on the TV, then turn off the TV and undo the short and that's it. | Ademar / Videira sc | |
PHILIPS |
20PT-3331
|
No sound | Remove or lift the diodes d-6809 and d-6908 | Ademar / Videira sc | |
PHILIPS |
29PT-9467
|
Cushion effect | Replace the q-440 irfs-630 and zd-441 diode (8.2v) | Ademar / Videira sc | |
PHILIPS |
20PT-326
|
No color | Enter service mode using code (062596) see option sy and set to 2 or 3 | Ademar / Videira sc | |
PHILIPS |
14PT-3131/4131/3331/4331
|
Vertical bars on the left side | Make 2 turns around the fly back ferrite and solder the two ends together. | Ademar / Videira sc | |
PHILIPS |
20PT-4331
|
Sound noise when in stand-bay | Increase 01 10k capacitor for 50 volts no pine (1) do (ic-7902) an-7523 pro terra | Ademar / Videira sc | |
PHILIPS |
29PT-552
|
Warming up the r-3488 (4r7) | Change the vertical output ci (stv-9379) | Ademar / Videira sc | |
PHILIPS |
25PT-5541
|
Does not oxidize, does not light up the LED | Check the resistor that works together with the fet (r-3513) 2k2 | Ademar / Videira sc | |
PHILIPS |
LINHA GL
|
The image overlaps on the side | Add 01 27 k resistor in parallel with the r-3239 | Ademar / Videira sc |