Philips Repair Tips
Search: philips
Results: 14210
Results: 14210
Make | Model | Symptom | Problem | Solution | By |
---|---|---|---|---|---|
PHILIPS |
29PT9467C/78
|
Vertical line at the top of the screen | D450 shorted, r452 2.2Ω open. | Evandro Estrela | |
PHILIPS |
42 PFL 3403/78
|
When you turn it off, there is sound | T. 701 | Resoldalo | Vicena |
PHILIPS |
FW-D798
|
The STB LED lights up and then goes out | Power supply d-909 diode shorted | Replace and resolve | ELETRONICA NISSEI SOUND embu-sp |
PHILIPS |
29PT5642
|
Vertical closed but with little width and whistle coming from the flyback | Damaged fuse 1452 | Replace it without measuring | BOMTEMPO MECATRÔNIC |
PHILIPS |
14GL1015/78R
|
Stop, where at the power supply output there should be 70 volts there is 9 volts | Transistor 7508 in short and cynoscopio with cracks and sparks in the valve under the deflector | Replace the but 12 af transistor and the image kinescope | Domingos |
PHILIPS |
15GL1015
|
Does not turn on low voltage at the 51 volt power supply output | Transistor 7508 (but 12 af) shorted and broken tube valve and spark near the deflector | Replace the transistor and image kinescope | Domingos |
PHILIPS |
29GX1898/78R
|
Power supply voltage vo around 30v | Capacitor 2531 (47uf/200v) aberto | Replace it to eliminate the power supply ripple and the voltage will go to 130 volts (vo) | Domingos |
PHILIPS |
29PT4635
|
Turns on and before the image appears you hear a noise coming from the horizontal oscillator area and it turns off when you press the channel button, it threatens to turn on and stops again | Smd diode 6467 bas216 with small leakage and q7450 with leakage(pdta114et | After the replace, the TV started working normally again | JOSÉ GUSMÃO |
PHILIPS |
20PT4331
|
Nothing works | It wouldn't turn on and after operation there was no height. | Replace of ci 7520 and vertical 2465 capacitor | lou |
PHILIPS |
21PT
|
Sound takes a while to come on when you turn on the TV | Capacitor 2444 /470 nf 16 v. | Replace the same | dan levita |
CCE E PHILIPS |
HPS , PT E FWM
|
TVs that turn on and off all the time, or take a long time to turn on, when changing bcs 337 and 327, replace them with bd135 and 136, only respecting the correct position of the pins | It won't come back with this defect. | Help yourself, post your tips here. | ÁdrianChapadãodoCéu |
PHILIPS |
21P8467C
|
No color in the channels but there is color in av | Memory | marcelo marques | |
PHILIPS |
29PT4635
|
Alloy with width flaw | Changing the cap width, even measuring good. | marcelo marques | |
PHILIPS |
14PT316A/78
|
When we turn on the TV it threatens to work by making a -tsssss, and only the LED stays on | 18k resistor in position 3470 | CACER69 | |
PHILIPS |
20PT-3331
|
Turning off | Memory | Rewrite memory | Fábio Andrade |
PHILIPS |
21PT8467
|
Vertical closed halfway to the bottom of the screen | Memory 24c16 | Domingos da Eletronica | |
PHILIPS |
20CT-16CT 14CT
CTO |
It takes a while for the shine to come | +12v electrolytics coming from the fly exhausted | jasvan souza | |
PHILIPS |
20CT-16CT 14CT
CTO |
White screen, no sound and no image | No voltage on pin 14 of the tda2541 | C147 from 2k7, turn it off for testing, if it works, replace it | jasvan souza |
PHILIPS |
20PT3331
|
Vertical closed at the top of the screen more or less 4 fingers (voltage on the bd135 collector 40volts) normal is 20v. | Electrolytic Capacitor C2465 Headless (10mF/160) | ||
PHILIPS |
25PT5536/78R
LO1L1{2K2} |
It doesn't gun and it's whining r3488 exit from the vertical | If you connect the TV with the horizontal coil wires turned on, it starts to oscillate and the r3488 which goes +b ci8359j .. | nilsonfonseca |