Search: philips
Results: 14210
Make Model Symptom Problem Solution By
PHILIPS 29PT458A
Turns off immediately after turning on Fuga no transistor 7461(bc337) sliva
PHILIPS 20PT222A/78R
It doesn't turn on, it's just a noise from the speaker like knock, knock, knock. C 2447 broken I replaced it and resolved ezequel de andrade
PHILIPS 20PT4331
League with no image and no sound R3441 3443 R3441,3443 open ELETRONICA MAURI JUNIOR
PHILIPS 20PT222A
After a while on, a strip appears from left to right and turns off D 6461 e d6464 1n4148, c2469 390 , c2462 4k7 BEIVIDAS SERVICE
PHILIPS 21PT9467C/78
Vertical closed half of the screen at the top with three colored bands D 351 open I replaced the diode that was open and took advantage and immediately replaced the capacitors. DIGITEC ELETRONICA Lambarí D'oeste -MT
PHILIPS 14PT4131
PT
The customer dropped the TV. and she was silent It was very difficult to find the defect. It looks like a crack moving the plate and the sound came back but it wasn't the plate. it was a capacitor. smd. on pin 31 of the ci. all. terminal cracked. c2201- c2202 ok. C2201 c2202 good luck This email address is being protected from spambots. You need JavaScript enabled to view it.
PHILIPS FWM 208/78
Does not recognize pen drive, and there is no sound on the CD C.i 5v regulator open Ic 103, also replace ic u2 ELETRO CENTER
PHILIPS 20PT120A
With thick lines at the top of the screen, in vertical deflection. Broken r3407 terminal. Replace r3407 (220 ). Ademir tc
PHILIPS 29PT9467C
Fly back Bsc27-n2291 is the same as bsc29-0135z This email address is being protected from spambots. You need JavaScript enabled to view it.
PHILIPS 29PT8422/78
Turns on, as soon as the blue screen appears, it turns off 33v zener diode near varicap, replace without measuring Dz 6001 animal caverna
PHILIPS FWC270
There is no audio and low audio Bc847b smd position 7302 with measuring leak direct exchange macceletronica
PHILIPS 14PT3336/78
When turning on horizontal risk (closed vertical) and turns off R3448= 1r open Just replace it for another one like it Paulo Sertel Itararé SP
PHILIPS 29PT9467C
No blue, possible tube defect! but because of the tube, the following components burned out: r910, r917, r918, r924, r919, c904 and q905 Reactivate the tube at low level and replace the following components, r910 22homs, r917 1k2, r918 1k, r924 180homs, r919 56homs, c904 100k, q905 a1015 Replace them and everything is ok Fernando eletrônica
PHILIPS 21PT9467/78
SK4-1L
When turned on, it triggers protection Filter capacitors c628, c630. CACER69
PHILIPS FW M377
I'm here Sem st-by 1v5= 0v em pino 13 d0 stk403 Q727 bc556 e r795 22k smd replace vitaltec
PHILIPS 29PT554A/78R
HC070263
It turns back on to standby, sometimes it turns on with a white stripe and RGB lines at the top, sometimes it turns on with a small image in the center of the screen, or it turns on with a white globe in the center and turns off when tapped on the board... I resoldered the ci7401 it seemed to be well soldered BOBY
PHILIPS 29PT5642
Turning off with banner at the bottom of the screen C2242 100nf change without measuring SIDNEY ALVES
PHILIPS 14PT3131/78R
Low power supply with 70v at the +b of the secondary Leaky coupler photo Replaced the photo coupler (solved) JOANILDO SILVA
PHILIPS 20PT3336/78
Tv inoperative R 3355 proximo ao flay
PHILIPS LX600
-
Doesn't work Without the power supply ics Roberval Almeida