Philips Repair Tips
Search: philips
Results: 14210
Results: 14210
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| PHILIPS |
20GL1345
|
TV turns off quickly after turning it on, sometimes it doesn't even turn on | Q7537 (f423) near fly with small leak | zé apolonio | |
| PHILIPS |
21PT9467C
SK4.1L |
3 colored lines appear at the top of the screen | R 358 220Ω/2w | Note that the 21pt9467 scheme is different from the 9767c in the other scheme the position is r304 | JOSÉ GUSMÃO |
| PHILIPS |
32PFL3404
|
Dark image (even more so in the center) | Replacing the power supply board | robson | |
| PHILIPS |
20PT3331/78
|
Turning off. | Solution: adjust fly back screen | BARRETO CRUZ | |
| PHILIPS |
14 PT 3131/78
|
No sound (Audio) | Solution: check ci - an 7523 n and components around it, if ok! d e s a c t i v a r c - 2908 (4.7uf/50v) | BARRETO CRUZ | |
| PHILIPS |
14 PT -3131/78
|
Vertical closed at the top of the screen | Solution: change c - 2444 (470uf/16v) c - 2446 (470uf/16v) c- 2465 (10uf/160v) | BARRETO CRUZ | |
| PHILIPS |
20 PT 3331/78
|
Turning off | Solution: adjust the flyback screen. | ||
| PHILIPS |
14 PT 3131/78
|
No sound (Audio) | Solution: check ci - an 7523 n and components around it, if ok! d e s a c t i v a r c - 2908 (4.7uf/50v) | ||
| PHILIPS |
14PT - 3131/78
|
Vertical closing at the top of the screen | Solution: change c - 2444(470uf/16v) c - 2446(470uf/16v) c- 2465(10uf/160v) | ||
| PHILIPS |
29PT5642
|
TV turns off by itself, sometimes it takes a while to turn off. | Cold solder on the flay-back pin that is connected to ground. | Soldered and ready. | Armando,EletrnicaEvoluSom. |
| PHILIPS |
29PT5645
L0401L |
The power is high but the filament does not turn on, in 5 seconds it turns off | Shorted tube | Replace the tube | cleberlima |
| PHILIPS |
21PT5433/78R
|
Turns on with the image a little blurry and then immediately. | I changed the socket, it improved but the image continued with blurred colors and kept turning off, so I checked that the filament voltage was low, I changed the r3444 and r3443 and it returned to normal. | Replace r3444 and r3443 and check 2444 | dodim |
| PHILIPS |
14PT316A
|
Doesn't start | Change fly back, it turned on but with a hoarse sound, also change potentiometer 3540 adjustment +b leave the adjustment at 95 volts... | pfa | |
| PHILIPS |
29PT4635
|
Doesn't start | Shorted horizontal output transistor c4455 47mf exhausted | Replace horizontal output transistor and c2455 | juci |
| PHILIPS |
20PT3331
|
Dead | Bul 312 | preá | |
| PHILIPS |
14PT4131
|
Stretched image when adjusted in service mode and turned off to store but stretched back | Replace epron 24c16wp | macedo domingos | |
| PHILIPS |
14PT112A
|
TV turns on in drizzle without OSD keys stuck does not accept remote control commands | R3677 connected to pin 33 of the micro | Replace r3677 | Roberto Consertos |
| PHILIPS |
20GX1555
ANUBIS |
Appears on the screen written next to the channel number | Press the channel and volume keys together to darken the screen and disappear the writing on the screen | Volume plus and channel minus or vice versa that disappears | ELETRONICA MAURI JUNIOR |
| PHILIPS |
20GX1555
ANUBIS |
Won't turn on without power supply | Replace c2516- c2506 | C2516 4,7x100v c2506 47x100v | ELETRONICA MAURI JUNIOR |
| PHILIPS |
20GL1044
GR1-VA |
No OSD, normal sound, no image. | The user had entered the installation menu and set all commands (brightness, contrast, color...) to minimum. To be able to restore, just randomly press the menu (hold down) and volume + keys. | littlecarlos |