Philips Repair Tips

Search: philips
Results: 14210

Make	Model	Symptom	Problem	Solution	By
PHILIPS	TODOS QUE BDS NA SAIDA VERTICAL	Only half of the top or bottom image	R3446 sup. r3445 inf.		This email address is being protected from spambots. You need JavaScript enabled to view it.
PHILIPS	20PT4331	Does not include audio and video	Enter service mode (062596+menu) go to option and then to 0p5 enter the number 072 and exit by pressing the menu key and as soon as you exit, turn off the TV in the standy bay to record	Enter service mode (062596+menu) go to option and then to op5 enter the number 072 and exit service mode using the menu key turn off the device so that the replace is recorded in the standy bay and turn it on again	Julio Cesar
PHILIPS	21PT9467	Vertical, with thick strokes and closed about five cm at the bottom and top.	Electrolytic capacitors, c-315 and c-316, both 1000ufx25v. replace them, it's ok.		Cláudio Ribeiro, TECNOSAT ELETRÔNICA E INFORMÁTICA, Jataí-Go, This email address is being protected from spambots. You need JavaScript enabled to view it.
PHILIPS	29GX1898/78	Tall, vertical fountain burning!!!	2512 capacitor with leak on the power supply plate!!	Replace "immediately" quickly and run for a hug.	TV TECNICA BRACEL
PHILIPS	14GL1019	Vertical half closed giving lines	Change the capacitors of the vertical resolder tda 8361 and around it change the green wire that goes to the +12 kinescope PCI to +8v		WARLEY CESAR
PHILIPS	21PT9467C SK4.1L CA	Turning off as soon as the image appears	Zd303 with leak	Replace	eletronicaoeste
PHILIPS	29PT5642 L04U	It doesn't turn on, only the red LED is on!	T7406	Put bu908 or 508	ÁdrianChapadãodoCéu
PHILIPS	29PT9467S/78	With sound without image, without high voltage beeping loudly	Transformer and lines switch		This email address is being protected from spambots. You need JavaScript enabled to view it.
PHILIPS	20PT122A	LED is on but does not turn on.	C2551 e r34? no pino do +9 do flyback		ÁdrianChapadãodoCéu
PHILIPS	20GL1044	Does not oscillate horizontally and makes a noise at the power supply	Cause: 22k r3501 open		klein
PHILIPS	VARIOS	How to solve various defects on LCD and CRT TVs	<a href="http://www.electronica-pt.com/images/fbfiles/files/dicas_tv_philips.pdf" target="_blank"> dicas philips</a>		amram
PHILIPS	PT3131	Risk of vertical retraces at the top of the screen and turns off by itself@@@	C2460=68k on flay's side	Help yourself, leave your tip ass. arni	EETRONICA ARNI-L. LEAL- SC
PHILIPSSCURA	29PT552	Very dark image	Cause: 56k resistor 3482 open		klein
PHILIPS	29GX1999/78 GR6LS	Doesn't start. tube does not load. LED flashes 4 times. sound working normally.	The 138 volt power supply that powers the horizontal was very low. damaged 100uf/200v and 47uf/250v capacitors.		Gilcimar Rocha Pereira
PHILIPS	14PT3336	Turning off in a few seconds	Bc 337 on the line that feeds the varicap 5 volts	In this case, I wouldn't get the channel either	This email address is being protected from spambots. You need JavaScript enabled to view it.
PHILIPS	29PT5645/78	The stand-by does not turn on	D6533 replace works normally again		marcos soares
PHILIPS	20GL1340	Vertical belt doesn't synchronize, it goes really crazy, regular power supply trimpot goes fine and then locks up again	Brown capacitor behind tda 8305, c162 number 223	Replace the capacitor	celito santo angelo
PHILIPS	40PFL8605D/78	Dead	Ray	Replace u101, d301	felipe
PHILIPS	29PT5642	Twisting image after changing the flyback for an mxt or fbt	Image becomes distorted when white parts with high contrast appear	Remove the ferrite from the original flyback and place it in the mxt or fbt	Eletrônica Solar
PHILIPS	21PT8467/78	Mute / vertically closed / 5 centimeters at the bottom and top	Eeprom-24c16wp		moreno-pirat.