Philips Repair Tips
Search: philips
Results: 14210
Results: 14210
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| PHILIPS |
CTO
|
Problem with tuning | S157 e s158. | Perse | |
| PHILIPS |
14GX1618/78R
|
The screen is completely white, full of lines, it's as if the screen were fully open. | R 3469 | Perse | |
| PHILIPS |
20GL1045
|
Total inoperative | D 345 | Perse | |
| PHILIPS |
THS3365X/78 DVD E RADIO
HDMI |
Doesn't turn on without more b + in primary and secondary | R937 1m open | Lightning struck the electrical network and the power cable was connected. | TEC TIOADRI |
| PHILIPS |
40PFL5605D
|
After a few minutes of operation the screen becomes dark and with normal sound | Bad inverter starting transistor and must be replaced with a bf 423 | Replace the unknown transistor q800, put bf423 and replace pc701 | Eletro Center |
| PHILIPS |
29PT558A
|
Combines missing height with colored lines and shaking at the top of the screen. | Replace capacitors 2473 and 2471, both 100k smd | ||
| PHILIPS |
FA-931
|
Noise at the outputs. | I.c. lc7821 (placa selector in) | Mário Tavares | |
| PHILIPS |
29PT5642
|
Normal power supplys tv doesn't flicker | D6001 33v short | Replace | paulo-maceio/al |
| PHILIPS |
21PT9467/78
SK 4.1 |
No image, with normal characters and normal sound. | After changing the flyback, which was cracked, the TV had no image. | D302(1n4148) shorted. | ÁdrianChapadãodoCéu |
| PHILIPS |
29PT5642
|
Turns on and then turns off with horizontal stripes without an image and a bright point in the center of the screen when turning off. | Changing r3351/100r and 7330 tda-6107 turns on is normal, just adjustments. | I replaced these parts and it was beautiful. | Eronaldo |
| PHILIPS |
20PT228A/78R
L01.2L AA |
Sem audio, 6v pino 4, 0v pino 2 ic7902(mono) | C2905 (leakage or short) | Replace it | SADER |
| PHILIPS |
29PT5642/78
L04L AA |
LED flashes in this sequence 1 - 5 - 11 times, when it turns on, the board shrinks on the sides and turns off shortly afterwards | Photo 7513 | Replace it | SADER |
| PHILIPS |
29PT
|
Turning off error 11 | Tda6107jf | Replace ci tda6107jf | digital tec |
| PHILIPS |
PFL 3404
|
The lights turn on but there is no image | Clean the contacts of the flet that connects the PCI TCOM with the display. In my case it worked. good luck | Pedro ironei | |
| PHILIPS WIDE SCREM |
28PT6441/78R
|
TV doesn't turn on. It just stays on standby | C2511 | Replace the capacitor with a 100μFx50volt one. The curious thing is that some devices do not have this component. Just replace and smile! | tectron eletronica ipatinga |
| PHILIPS WIDE SCREM |
28PT6441/78R
|
TV does not come out of standby, turns on and goes back to standby | O capacitor c2511 | I checked the voltages of 3.3 and 6va, they were normal. however, on pin 2 of the ci 7520 there was not enough starting current for the +b 120v | Rogerio |
| PHILIPS |
14PT4131
|
Bad sound like a burnt out output | Capacitor de 220p c2861 | Replace | jtm eletronica |
| PHILIPS |
20PT3331
|
No sound or low volume | Place cond.electrol.100x25 parallel with d 6908(smd) neg. in k and posit. in a.(solved) | joaquim | |
| TV-PHILIPS |
21PT5435/78
|
Device burned by lightning | After redoing the burnt tracks I found that the device did not work even with normal voltages, that's when I checked that there was no 3.3v on pin 61 of the computer (tda9370ps/n3/a/1918) | Replace the computer and go for a hug | |
| TV PHILIPS 32´´ LCD |
32PFL 5604
-------- |
Does not turn on the stand-by, inoperative, has no power supply. | Cw2 shorted. | Cw2 de 220pf | Ademir tc |