Philips Repair Tips
Search: philips
Results: 14224
Results: 14224
Make | Model | Symptom | Problem | Solution | By |
---|---|---|---|---|---|
PHILIPS |
29PT4635/78
|
Does not turn on, does not light stand by LED | Transistor 7460 bu4508dx short base/emitter - TV changer ok | josebauru | |
PHILIPS |
14PT1350/00
L6.1AA |
When you turn on the TV, the volume stays at maximum, it doesn't go down and the volume bar doesn't appear | There st24c02cb1 | Replace for another, or program again | led21 |
PHILIPS |
29PT9467
|
No image with sound | Device with almost zero tension on the vertical screen. | Tda 4865aj, if you don't have it you can use tda4863aj | sslf |
PHILIPS |
FW360C
|
Due to the sound, the panel functions did not work, that is, they did not work, but the panel lit up | Short in the regulator of the cdc7cc board, | Replace the lm 7805 | moroni eletronica |
PHILIPS |
29GX1899
|
TV just stays in demo mode and doesn't come out | In my case, the TV had bad contacts, so I replaced them and simultaneously pressed the channel - and volume+ keys, then it exited demonstration mode. | Or if you prefer you can press channel + and volume - then it will turn off and when you turn it on it will return to normal | |
PHILIPS |
PT3331
|
Vertical missing bottom | Changing the memory doesn't work | It works fine again | jose santos vicente |
PHILIPS |
FWM57
|
When you plug it into the socket it turns itself on to the CD without pressing any key and then keeps turning it on and off | Tr smd 7506 open (the same is on the 12 and 5 volt regulator board) | Changing this tip also works for the fwm570 as it also has the same board | antonio nobrega(patos pb) |
PHILIPS |
29PT8568
|
TV with blurred image | Tube, just clean the focus input pin of dirt and everything started working normally again. | Alvanyr |
|
PHILIPS |
29 PT5645/78
|
Excess width | This device did not regulate width, a 12.6mf capacitor was placed in place of the 15mf bust capacitor. The defect was resolved, hugs, friends | EURIPEDES CAETANO FILHO | |
PHILIPS |
20PT3331/78
|
No sound | Replace c2208 100k pin 27, c2206 4k7 pin 28 | fabiusmax | |
PHILIPS |
21PT6456
|
TV turns on and then turns off, goes to standby | 22uf/250v electrolytic capacitor 180v filter | Replace the TV back to normal | AFONSO SANTANA |
PHILIPS |
21PT5433/ 78R
|
Inoperative, giving small clicks at the power supply, leak | C2424, between b and c of the horizontal transistor (152k/ 2kv) horizontal leak | Barter it | Marcondes |
PHILIPS |
14PT110A
|
Does not turn on, the LED lights up and locks | Broken track on the positive of cap 2551 and resistor 3470 | beto eletronica/Acrelandia AC | |
PHILIPS |
29PT4635/78
|
Turning off every 5 minutes | Defective tube | beto eletronica/Acrelandia AC | |
PHILIPS |
20GL1049
|
Replace o capacitor c-2351 | C-2351. 220mf/25v seco | Replace o capacitor c-2351 | André Toshiba |
PHILIPS |
14PT314A
|
No plot with return lines then hang up | After changing the fly-back, the television goes into protection mode. By slightly opening the skew potentiometer, you can see that the device has a white screen and return lines. | D6006 open and d6343 short-circuited, d6343 is on the RGB board in the kinescope. | WAGGUINHO |
PHILIPS |
TV14MT2131
|
Vertical closed at the top of the screen with three colored lines and then turns off | Capacitor 2460 de polieste 560k 250v | domingos sp | |
PHILIPS |
14PT24S/78
|
Totally inoperative | Cracked welds on ci's mc44603ap (power supply) and tda8374ps-3y | Resoldering and a hug, it's another happy customer | Paulo Sertel Itararé SP |
PHILIPS |
20PT3331
|
No sound; sound increases by itself | Eliminar dido zener smd d6809(d6908) de h, shtv | francisco | |
PHILIPS |
21PT8467/78
|
Turns on normally with image and sound then turns off | Resistor on the tube plate r 3318 | beto eletronica |