Search: philips
Results: 14210
Make Model Symptom Problem Solution By
PHILIPS 32PF5320 /28
Indicating f or cf on the screen (factory mode active). Press the [volume "-" & program "-"] keys simultaneously on the TV for 5 seconds. Silva
PHILIPS 32PF5320 /28
Damage fuse This item depends on the chassis and LCD display used, if the power supply uses the gbj6j-b15 rectifier bridge (generally positions 6807 or 6h07) and it shorts out, it must be replaced by the ts6b05g-06 rectifier bridge with code 3104 307 09981. Silva
PHILIPS 32PF5320 /28
After a while the image disappears. - when connected to the video component input (dvd from other manufacturers and mx3910) 1) replace the coil is 5q06 which is close to the db15 connector (blue) of the ssb with a 100r resistor (currently used) this value can be reduced to a minimum value (jump). 2) if the result is not satisfactory, the "scaler software" must be updated using the gprobe/genesis program (contact technical support). Silva
PHILIPS 15PF9936 17PF9945 23PF9945
White dots aligned on the display Remover capacitor smd 2380 do painel scaler Silva
PHILIPS 15PF9936 17PF9945 23PF9945
Doesn't work Check capacitors c32 and c48 Silva
PHILIPS 30PF9946D/78
Noise in the image via the hdmi or cvi input Check soldering ic u4201 on ssb panel Silva
PHILIPS 30PF9946D/78
Noise in the image via the hdmi or cvi input Check welding connector 1601 on the ssb panel Silva
PHILIPS 26PFL3404 /78
Remote control does not work Check welding fb02 (panel ir) and fb205 (panel ssb) Silva
PHILIPS 26PFL3404 /78
Interference when connected to hdmi Check welds on: r1501, r4404, rp4404, rp4406 Silva
PHILIPS 26PFL3404 /78
One of the colors in cvi is missing or has an irregular color Cold welding ci u4201 Silva
PHILIPS 26PFL3404 /78
One of the colors in cvi is missing or has an irregular color Cold welding c1206 Silva
PHILIPS 26PFL3404 /78
One of the colors in cvi is missing or has an irregular color Cold solder r1203 Silva
PHILIPS 26PFL3404 /78
Partially illuminated display Possible leak in transformer t803, q801 and q802 - ipb Silva
PHILIPS 26PFL3404 /78
Altered tone or inverted color Check welding and dirt on the ic u4201 on the ssb panel Silva
PHILIPS 30PF9946D/78
Sound with hiccups Check welding two jumpers 9722-23-28-32/34 Silva
TV PHILIPS 20PT 4331/78R
Tv with black stripe at the top of the screen I changed the 10mf 250v capacitor and it resolved. BF.COLATINO
PHILIPS 42PF7320
Doesn't start 11 flashes on the reset board Ic7701 sound output short (just disconnect the audio card cable and it will turn back on) vagnernardes
PHILIPS 20PT3131
L03.1L
Burning horizontal output and heating fley back D 6422 e but 11-afp Replace 6422 diode and photo coupler -et103 and but 11 afp luiztvsom
PHILIPS 20PT222
Turns off after a few minutes. closing the image from left to right Chap. ceramico c5445 22k located near the trans. horizontal exit pardalzito
PHILIPS 14PT818A
U10
There is no sign of turning on, it does not turn on and it does not oscillate. Photocoupler Photocoupler replace Leomar Lunkes