Philips Repair Tips

Search: philips
Results: 14210

Make	Model	Symptom	Problem	Solution	By
PHILIPS	DVP3254K	DVD with very low sound	Ce26 de 220uf16v	Replace	Eletroclaudio Aguas Belas PE
PHILIPS	21PT9467	Vertical closing after about 5 minutes	TV works ok, after + - 5 minutes the vertical closes at the top of the image, consulting other colleagues and also doing tests I came to the conclusion that the deflector was the defect	The right thing to do would be to replace it, but it is not sold. I did the following: I removed it from its place and on the inside of the deflector there were two stickers. One came out well, the other was well glued and dry, I believe that due to overheating, I removed the adhesive, cleaned the winding with thinner and then applied spray varnish, it worked ok	Tecnardi
PHILIPS	42PSL5332	No audio	When turned on, there was a normal image, but no sound. The detail was passed by a Philips authorized representative and as they found no defect, they condemned the main board.	1Ω smd resistor. As I didn't have the resistor location number, to help locate it, it is close to the female input jack (audio in PC) the resistor was open	José Gusmão
PHILIPS	29PT552	Power supply pulsating LED off without secondary voltage	C2550		GENIVALDO
PHILIPS	20PT220	Power supply does not arm LED blinking weakly with a puÇ on the speaker	It was the c2550 shorted		Eletroclaudio Aguas Belas PE
PHILIPS	29PT5642	When turning on colored lines and then turning them off	Causes shorted diode in the vertical d6457		www.rmeletronica.com.br
PHILIPS,CCE,SONY	VALIDO PARA AS MESMAS		TVs turn off so quickly that we have no idea where to look for the defect, here are some tips. You will use 3 diodes in4148, connect the anodes to the connector that comes from the main board to the tube board pin1,2,3 and join the cathodes and connect to pin 5, ready, the TV will no longer turn off, you will see the corresponding defect on the screen. This applies to the brands: Philips, CCE, Sony. In the case of Sony, we use 1k by 1/4W resistors, we connect each one to the RGB resistors We join the 3 ends and solder them to the connection, cool, in case the TV turns off so quickly that we have no idea, as already explained where the defect is, this tactic will release the plot faster on the screen, generally it takes 10s to release it, we reduce it to 4s You will use an 800m 6+6 transformer, connect it to the filament, wait for the cathodes to heat up and turn on the TV. There will be a way for you to access the error code and view the plot. There is a way for you to view the corresponding defect on the screen or how to access the error code. ex:0 0 0 0 0 how is 0 0 0 0 0 it means that the TV is working correctly if a number appears it is a sign that the TV is defective in another stage, the error code counts from left to right ex: 9 0 0 0 0 this 9 points to the eeprom memory or it is defective or lost or even a lack of power. a 10k resistor in the case of sdam1 sdam2 connect a short circuit from one to the other and turn on the TV when it starts remove the short immediately the TV will turn on in service mode this is either without the TV's CR or the TV is not turning on alone The LED turns on and the LED indicates the error code, eg: 9 blinks correspond to an error.		Miltom eletronica micro e epron
PHILIPS	29PT552A-78R LLS	LED blinks and doesn't turn on	Exchange 2463 (102k/2k) and 2518 (471k/1kv)		WISANDRO
PHILIPS	14PT3131	No sound or low sound	C2444 of 470uf 16v near the fly.	Replace	Eletroclaudio Aguas Belas PE
PHILIPS	29PT552A-78R LLS	LED blinks and doesn't turn on	Exchange 2463 (102k/2k) and 2518 (471k/1kv)		WISANDRO
PHILIPS	29GX1898/78R	Does not turn on. without +13v power supply.	There is no voltage pin 7=14vdc and pin 8=5vdc of the ci 7510 (uc3842bn).	Cap elet 2506(47μF/25v) e 2516(4,7μF/50v)	audio e video
PHILIPS	21PT5433/78R		How to enter the service without credit	On the board there is sdam 9257 and a j sdam 3606 r 10k short circuit from j to the resistor when the TV turns on remove the short immediately it is in service mode	Miltom eletronica micro e epron
PHILIPS	21PT5433/78R LO3		How to enter the service without credit	On the board there is sdam 9257 and a j sdam 3606 r 10k short circuit from j to the resistor when the TV turns on remove the short immediately it is in service mode
PHILIPS	29PT4643/78R	Vertical rolling top	R 3464 or 3465, the original only had a 220r resistor that was changed to 260r	Just replace and run to the hug. (62) 3315 3892.	Eterno Videotron
PHILIPS	14PT3336/78R	(dead)	R3445(1r)next to fleybak	Replace r3445(1r) next to th	Jarbas Santos (eletro-serv)
PHILIPS	20PT326A/78R	Non-functional inoperative.	But11apx shorted.	Replace but11apx with the original or but12af if it won't burn horizontal output.	celinvds
PHILIPS	14PT3336/78	(dead)	R3445(1r)	Replace r34445(1r) next to th	Jarbas Santos (eletro-serv)
PHILIPS	FWM589	Doesn't start	Exchange c2909	C2909 470n replace	domigos sp
PHILIPS	14PT3131	Turns on the image appears and then turns off	Defect was found in the rgb pci of the tube	In my case it was the transistor 7318(bf423) short and the resistor 3318(220r) open tip check them all.	eletronica fernandes
PHILIPS	29SX8879	Doesn't turn on, no +b	R 3138 33k aberto		Master Eletronica