Search: philips
Results: 14206
Make Model Symptom Problem Solution By
PHILIPS DCM276
Does not turn on inoperative C1144 1000x10cv stewed Making the replace seems like it filters the 3v3 orlando lott
PHILIPS 32PFL4606
Led off C14 shorted on the remote plate The 12 v supply kept oscillating This email address is being protected from spambots. You need JavaScript enabled to view it.
PHILIPS 20PT4331/78R
TV turns on normal +b voltage making noise on the flyback then the TV doesn't turn on Shorted collector base transistor 7461 bc857b
PHILIPS MCM233
Doesn't close the drawer Micro key that is below the display with a problem Swap the two... brasil sul eletronica
PHILIPS 21PT9487C/78
No image with only a horizontal stripe at the top of the tube Capacitor c315. 1000uf per 35v altered Replace the 1000μF capacitor with 35 v Eletrotudo
PHILIPS 32PFL6615/78
Blink 3 times R222 and r219 open on the power supply board. I replaced it and zefini lol. Sansao
PHILIPS 42PFL3607
Doesn't start C9353 na power supply, capacitor de metal Adrian (Chapadão do Céu Goiás)
PHILIPS 42PFL3604
TCM3.1L LA
Screen washed. (lacking color and sharpness) C81 e c82 na placa t-conn Replace the same
PHILIPS 42PFL3604
TCM3.1L LA
TV does not turn on, stand-by LED is on. On main board: c534, c532, c474 all with low capacitance. DSSTECH
PHILIPS 20PT220A/78
Turns off when pressing the plate Cold solder on the oscillator IC heatsink MARCONES DE ARARIPINA-PE
PHILIPS 42PFL3606/78
The LED lights up but doesn't turn on, normal voltage supply, the relay doesn't hit but when it's hot, sometimes it turns on and sometimes it doesn't turn on, intermittent C474 metallic 4.7mf x 16v very close to the crystal, potato Replace with a normal 10mf 16v electrolytic
PHILIPS 42PFL5332
Turning it on and off directly (turns off backlight) Changing photo couplers SFATEC ASSIST TECNICA
PHILIPS FW-C507
No sound comes out Transistor 7316 Transistor 7316 (bc547) leaking, just replace it and run for the hug! Lucas Venzke Canguçu
PHILIPS 21PT5433
Tsound is no sound C2444 note when removing from the board be careful with the positive trails..tv may not turn on Replace capacitor matieski
PHILIPS 42PFL3604/78
It just stays on standby Change c 474 of 4.7mf/16v, altered or opened, main board. Replace c474 Rafael GXP
PHILIPS 21PT8467/78
Turns on normally with sound but no image, the channel appears, the volume but does not produce the image R.3442 Replace r3442 from 100k next flyback Rosivaldo
PHILIPS 42PFL3604/78
Turns on after a few seconds, turns off the screen, leaving only the sound Faulty inverter power supply Replace the rw 977 trimpot, which can be replaced by a 15k resistor. In my case, I just had to replace it, first measure the rw 978, if it is replaced, the value can be replaced for a 220r resistor. AGILDO MENDES (MENDES ELETRONICA)
PHILIPS 55PUG6300
Does not turn on LED does not light up D9104 Replace diode matieski
PHILIPS 42PFL3403
Remote control doesn't work Check capacitor 2p10 (10uf 20% on LED/IR panel It's the only ceramic capacitor on the remote control sensor board and just replace it and that's it. orlando lott
PHILIPS 32PHG4900/78
Doesn't work D9101 shorted to the power supply Eliel Magno