Philips Repair Tips
Search: philips
Results: 14210
Results: 14210
Make | Model | Symptom | Problem | Solution | By |
---|---|---|---|---|---|
PHILIPS |
FL2.24
|
Picture gives black horizontal stripes, also on rgb | Ic72027 sda9205-2 lfr box defective (4822 209 31056). | ||
PHILIPS |
FL2.24
|
Picture disappears shortly after 30" or control does not function. | When hot, 13,5 mhz clock stops working; change the value of r3123 to 1k2. | ||
PHILIPS |
FL2.24
|
Picture disappears (fly back lines), on stereo and dual leds blink | Check ic7430 (tda4680). when tda4680 is too hot there is no picture (4822 209 31592). | ||
PHILIPS |
FL2.24
|
Overview of sops repair kits | Overview of sops repair kits ---------------------------- fl1.0 ag00 upto ag03 4822 310 20492 fl1.0 ag04 and higher 4822 310 31921 fl1.1 25" and 28" 4822 310 31919 fl1.1 33" 4822 310 31932 fl1.2 4822 310 31932 fl1.6 | ||
PHILIPS |
FL2.24
|
No sound, "on, standby, i" leds blinking | 10mhz crystal 1602 on the ssp defective, 4822 242 80276 | ||
PHILIPS |
FL2.24
|
No colors in tv mode | Check ic7365 (tda4650) on the ssp (4822 209 30837) | ||
PHILIPS |
FL2.24
|
Low frequency hum from subwoofer, buzz from right hand squeeter. | Check dc level on pin 1 and 9 of ic7011 (tda1521). if not correct, replace (4822 209 63913). | ||
PHILIPS |
FL2.24
|
Low brightness txt and osd, picture ok | If this condition occurs, check the option codes. resetting the option code numbers as per the service manual provided the cure. | ||
PHILIPS |
FL2.24
|
Jitter | In pip unit change the value of r3336 to 4k7. | ||
PHILIPS |
FL2.24
|
How to enable/disable "child lock" | Press "menu" button on remote control. when the menu appears on the screen, you select "special features" (this expression is language dependent) within "special features", the "child lock" can be enabled or disabled. | ||
PHILIPS |
FL2.24
|
Four dark bars over the picture. | The +5 volt was 5.6 volt instead of 5.1 volt. check/replace ic7551 (4822 209 70672). | ||
PHILIPS |
FL2.24
|
Foggy picture/fly back lines/protection | Check/replace r3517 1Ω on lsp (4822 052 11108). | ||
PHILIPS |
FL2.24
|
Distorted east-west & jitter on vertical side lines at switch-on. | In the fl1.16 and fl2.16: replace position t7610 on the lsp by bd536fi (4822 130 63508). delete position 2615. replace position 2611 on the lsp by 2,2 uf (4822 124 41576). replace position 3608 on the lsp by 1k (4822 051 10102). in the fl2.24: replace po | ||
PHILIPS |
FL2.24
|
Dark picture, only green led, no menu or osd. | +5v supply was 4,1v. voltage d6551 was 4,3v instead of 5,6v. check/replace d6551 (4822 130 80954). | ||
PHILIPS |
FL2.24
|
Dark fuzzy picture. osd and menu not in focus. | +5v was 7.8v and +13v was 15.5v ic7551 (lm358n; 4822 209 70672) defective. | ||
PHILIPS |
FL2.24
|
Crazy behaviour: no response from rc or controls. | Other phenomenas: volume up/down, spontanuous service mode etc. etc. in areas with top-teletext. replace control software by replacing eprom ic7002 to version v83 (4822 900 10506). for easy mounting also the controlboard 7115 (on ssp) can be replaced by | ||
PHILIPS |
FL2.24
|
Correction to service manual flx.14/16/17 and flx. | Correction to service manual flx.14/16/17 and flx.24/26/27. ----------------------------------------------------------- the code number of position 1200 (fuse 3,15 a) is wrong. the correct code number is 4822 070 33152. this fuse is situated on the lsp i | ||
PHILIPS |
FL2.24
|
Correction to service manual fl2.24/fl2.26/fl4.27 | Correction to service manual fl2.24/fl2.26/fl4.27 aa ---------------------------------------------------- the following position numbers are mentioned wrong in the stocklist of the scavem filter panel (page 35): 2512 4822 122 33496 100nf 10% 63v 3527 4 | ||
PHILIPS |
FL2.24
|
Correction to service information fl 95.01 | Correction to service information fl 95.01 ------------------------------------------ correction in the overview of 100hz and proscan boxen. the replacement for service code 4822 212 30534 must be 4822 212 31231 the replacement for service code 4822 21 | ||
PHILIPS |
FL2.24
|
Correction to service information fl 95.01 | Correction to service information fl 95.01 ------------------------------------------ correction in the overview of 100hz and proscan boxen. the replacement for service code 4822 212 30534 must be 4822 212 31231 the replacement for service code 4822 21 |