Philips Repair Tips
Search: philips
Results: 14210
Results: 14210
Make | Model | Symptom | Problem | Solution | By |
---|---|---|---|---|---|
PHILIPS |
ANUBIS-S
|
Distortion of sound | Replace c2102 by 4n7 (4822 126 12641) add r3130 56k (4822 116 52291) add r3136 39k (4822 020 23903) at pin 1 of ic7225-6f audio part remarks : introduced in production week 9331 | ||
PHILIPS |
ANUBIS-S
|
Distortion in btsc sound | Replace r3824 by 18k (4822 051 20183) replace r3825 by 18k (4822 051 20183) remarks : introduced in production week 9336 | ||
PHILIPS |
ANUBIS-S
|
Defocus of the teletext characters | It is recommended on the teletext panel (diagram n) to: replace d6813 by a llz-c3v0 4822 130 80879 remarks : introduced in production week 9407 | ||
PHILIPS |
ANUBIS-S
|
Correction service manual | Correction service manual ------------------------- for all versions: in the service manual aa page 7 and in product survey 1993-2 all sets with /58/62/75/79 are indicated to be "140 v only" mains voltage sets. this is wrong as "140 v only" sets do not e | ||
PHILIPS |
ANUBIS-S
|
Correction service manual | Correction service manual ------------------------- in anubis s aa service manual in the spare parts list the next parts are wrong: - d6445 must be byd34m (4822 130 83457) - d6447 must be byd34m (4822 130 83457) missing in the spare parts list is micropr | ||
PHILIPS |
ANUBIS-S
|
Correction on service information anubis-s bb 94.0 | Correction on service information anubis-s bb 94.03 --------------------------------------------------- for bb sets 25" and 29" diode 6521 is indicated in power supply diagram as bzx79-c4v7. this should be: - for 25" bzx79-b18 service code 4822 130 31024 | ||
PHILIPS |
ANUBIS-S
|
Correction | Correction ---------- only for /77 (trinorma) tuner for /77 anubis s sets is not published in spanish aa service manual anubis s 4822 727 19719. tuner uv936e/iec 4822 210 10582 please add to your service manuals | ||
PHILIPS |
ANUBIS-S
|
Combination of picture tube - yoke - multipole | Combination of picture tube - yoke - multipole ---------------------------------------------- only for 14" anubis s aa and cc sets for the 14" anubis s aa and cc sets, depending on the production date and the typenumber, 3 different tubes are used. every | ||
PHILIPS |
ANUBIS-S
|
Codenumber information | Codenumber information ---------------------- lot for txt and non txt sets anubis s aa & bb & cc -------------------------------------------------- lot for anubis s aa & cc sets: 14-20-21" non txt sets: 4822 140 10465 14-20-21" txt sets: 48 | ||
PHILIPS |
ANUBIS-S
|
C2505 discharge to prevent damage of ts7513 | C2505 discharge to prevent damage of ts7513 ------------------------------------------- for all anubis-s sets: always switch off the set under repair and discharge the big rectifier capacitor c2505 (diagram a) with a 1k/5w resistor (e.g 4822 053 32122) b | ||
PHILIPS |
ANUBIS-S
|
Bad picture sharpness of the 25" anubis s bb | It is recommended to replace on the crt panel (diagram ee) c2304, c2317 and c2330 by 470p 10% 50v 5322 122 32311 r3338, r3339 and r3340 by 22k 5% 0.16w 4822 116 52257 l5306, l5319 and l5328 by 820uh 10% 4822 157 71153 remarks : intr | ||
PHILIPS |
ANUBIS-S
|
Bad picture geometry | Replace 2447 by 680 pf 2 kv 4822 126 12269 remarks : introduced in production week 9319 | ||
PHILIPS |
ANUBIS-S
|
Bad colour switching performance | Replace: - ts7278 by bf494b (4822 130 41376) - r3278 by 8k2 (4822 116 52303) remarks : introduced in production week 9315 | ||
PHILIPS |
ANUBIS-S
|
Bad catching of colour carrier | Replace: c2275 by 220p (5322 122 32334) c2277 by 220p (5322 122 32334) c2278 by 220p (5322 122 32334) c2279 by 220p (5322 122 32334) remarks : introduced in production week 9328 | ||
PHILIPS |
ANUBIS-S
|
Of input mode | Av input mode ------------- if it is required that a set stays in av input mode after switching on, r3627 (1 kΩ) near microprocessor ic7600 has to be removed. | ||
PHILIPS |
ANUBIS-S
|
At ntsc the green colour is a bit yellow / red / orange | An new version of ic7225 will be introduced with a new ntsc matrix. this ic7225 is fully backwards compatible with the tda8362c/n3. new ic7225 tda8362e/n2 4822 209 33398 available from week 9412 onwards remarks : introduced in production wee | ||
PHILIPS |
ANUBIS-S
|
After warmup pix shrinks, stamp raster then blackout. | +8v supply to ic 7225 increases. +8v regulator ic 7218(78m08) no heat sink. change the ic 7218 and use a heat sink. | ||
PHILIPS |
ANUBIS-S
|
"curtain" effect at left side of the screen at dark pictures | It is recommended to adapt in the line drive part of the 25" anubis s bb set: replace r3453 and r3454 by a 4k7 5% resistor fuse 4822 052 10472 remarks : introduced in production week 9417 (the seriousness of the effect differs from set to set) | ||
PHILIPS |
ANUBIS-B
|
Vertical deflection is shaky. | Vertical deflection ic7400 is sensitive to temperature. replace ic7400 tda3653b (4822 209 60955). | ||
PHILIPS |
ANUBIS-B
|
Vertical black bar in picture. | Check c2299 10nf (4822 122 32862). |