Search: philips
Results: 14245
Make Model Symptom Problem Solution By
PHILIPS ANUBIS-S
Correction on service information anubis-s bb 94.0 Correction on service information anubis-s bb 94.03 --------------------------------------------------- for bb sets 25" and 29" diode 6521 is indicated in power supply diagram as bzx79-c4v7. this should be: - for 25" bzx79-b18 service code 4822 130 31024
PHILIPS ANUBIS-S
Correction Correction ---------- only for /77 (trinorma) tuner for /77 anubis s sets is not published in spanish aa service manual anubis s 4822 727 19719. tuner uv936e/iec 4822 210 10582 please add to your service manuals
PHILIPS ANUBIS-S
Combination of picture tube - yoke - multipole Combination of picture tube - yoke - multipole ---------------------------------------------- only for 14" anubis s aa and cc sets for the 14" anubis s aa and cc sets, depending on the production date and the typenumber, 3 different tubes are used. every
PHILIPS ANUBIS-S
Codenumber information Codenumber information ---------------------- lot for txt and non txt sets anubis s aa & bb & cc -------------------------------------------------- lot for anubis s aa & cc sets: 14-20-21" non txt sets: 4822 140 10465 14-20-21" txt sets: 48
PHILIPS ANUBIS-S
C2505 discharge to prevent damage of ts7513 C2505 discharge to prevent damage of ts7513 ------------------------------------------- for all anubis-s sets: always switch off the set under repair and discharge the big rectifier capacitor c2505 (diagram a) with a 1k/5w resistor (e.g 4822 053 32122) b
PHILIPS ANUBIS-S
Bad picture sharpness of the 25" anubis s bb It is recommended to replace on the crt panel (diagram ee) c2304, c2317 and c2330 by 470p 10% 50v 5322 122 32311 r3338, r3339 and r3340 by 22k 5% 0.16w 4822 116 52257 l5306, l5319 and l5328 by 820uh 10% 4822 157 71153 remarks : intr
PHILIPS ANUBIS-S
Bad picture geometry Replace 2447 by 680 pf 2 kv 4822 126 12269 remarks : introduced in production week 9319
PHILIPS ANUBIS-S
Bad colour switching performance Replace: - ts7278 by bf494b (4822 130 41376) - r3278 by 8k2 (4822 116 52303) remarks : introduced in production week 9315
PHILIPS ANUBIS-S
Bad catching of colour carrier Replace: c2275 by 220p (5322 122 32334) c2277 by 220p (5322 122 32334) c2278 by 220p (5322 122 32334) c2279 by 220p (5322 122 32334) remarks : introduced in production week 9328
PHILIPS ANUBIS-S
Of input mode Av input mode ------------- if it is required that a set stays in av input mode after switching on, r3627 (1 kΩ) near microprocessor ic7600 has to be removed.
PHILIPS ANUBIS-S
At ntsc the green colour is a bit yellow / red / orange An new version of ic7225 will be introduced with a new ntsc matrix. this ic7225 is fully backwards compatible with the tda8362c/n3. new ic7225 tda8362e/n2 4822 209 33398 available from week 9412 onwards remarks : introduced in production wee
PHILIPS ANUBIS-S
After warmup pix shrinks, stamp raster then blackout. +8v supply to ic 7225 increases. +8v regulator ic 7218(78m08) no heat sink. change the ic 7218 and use a heat sink.
PHILIPS ANUBIS-S
"curtain" effect at left side of the screen at dark pictures It is recommended to adapt in the line drive part of the 25" anubis s bb set: replace r3453 and r3454 by a 4k7 5% resistor fuse 4822 052 10472 remarks : introduced in production week 9417 (the seriousness of the effect differs from set to set)
PHILIPS ANUBIS-B
Vertical deflection is shaky. Vertical deflection ic7400 is sensitive to temperature. replace ic7400 tda3653b (4822 209 60955).
PHILIPS ANUBIS-B
Vertical black bar in picture. Check c2299 10nf (4822 122 32862).
PHILIPS ANUBIS-B
Tuning with system l/l` not optimal. Change on the if and synchronisation panel: c2579 into 47p (4822 122 31772) c2585 into 6p8 (4822 122 32507) c2590 into 22p (4822 122 32482). remarks : introduced in production from production code pm009222 and higher.
PHILIPS ANUBIS-B
Totally inoperative. Check: f1500 2at (4822 070 32002) ts7525 2sk1611 (4822 130 63048) d6502 1n4005gp (4822 130 81497) ic7500 tda8385/n2 (4822 209 63735) r3549 15Ω (4822 116 52182) ts7445 but 11af (4822 130 42679) for 14"-
PHILIPS ANUBIS-B
The error codes for the anubis b hotel tv (xxhtxxx The error codes for the anubis b hotel tv (xxhtxxxx/xx) is not published yet: for the total overview herewith a table is given for both the normal anubis b and the anubis b hotel: error led anubis b anubis b hotel code indi
PHILIPS ANUBIS-B
Supply switches off. Check l5445 l.o.t. (4822 140 10441).
PHILIPS ANUBIS-B
Ringing on vertical lines. Replace l5237 on the crt panel by a bridge wire 9237. remarks : introduced in production from factory code pm009219 and higher.