Search: philips
Results: 14245
Make Model Symptom Problem Solution By
PHILIPS CP110
Dead - no st/by led 22r safety res 3655 o/c
PHILIPS CP110
Dead - mains fuse shattered Check mains bridge rects & 150µ 385v mains smoother for shorts
PHILIPS CP110
Dead - fuse ok 300v on collector but11. But11 o/c base to emitter.
PHILIPS CP110
Dead - fuse intact Has high drive amplitude briefly at chopper tr at sw on - but11 chopper tr o/c b-e
PHILIPS CP110
Dead - chopper tr may be s/c C2656 150µ 385v o/c, d6672 byd33d in 32v supply leaky
PHILIPS CP110
Dead 1.6a fuse o/c; but11af s/c; mains rect s/c; also replaced cnx62 as precaution. still no ht - c2656 150µ cause
PHILIPS CP110
Dead C2162 0.47mfd ( near c2611 )
PHILIPS CP110
Dead "f1" showing in display 1653 t1a6 wickman fuse open
PHILIPS CP110
Dead But11af , tea1039 , bridge rec diodes s/c r3659 ( 100Ω ) , r3658 ( 120r ) c2661 upgrade to ( 2 , 200uf ) & cnx62
PHILIPS CP110
Corrugated verticals C2633 100µ 25v
PHILIPS CP110
Corrugated verticals C2670, 2621 22µ 250v
PHILIPS CP110
Control micro processors A production change has been introduced adding a shield to the control micro processor to prevent the processor being influenced by external fields. replacements will be supplied as a kit comprising the processor, shield and fitting instruction. the sh
PHILIPS CP110
Continuous page header display in subtitle Change text ic to type mab8461p/w196 part no4822 209 62479
PHILIPS CP110
Channel display goes to " e " Micro 7840
PHILIPS CP110
Chan display reverts to"e" Micro 7840 faulty
PHILIPS CP110
But11af gets stuck in stand-by mode; but11af gets hot. Check the value of resistor r3659 (100Ω). the fault occurs when the resistor is open or when the value is increased.
PHILIPS CP110
Brightness varying. Check/replace d6401 (1n4148: 4822 130 33939) on crt base pcb.
PHILIPS CP110
Bottom of raster missing R3572 o/c 1r5
PHILIPS CP110
Blank screen - gives blue screen with fb lines when a1 advanced Tr7405 bf423 on crt base s/c
PHILIPS CP110
Blank raster with "e" in display Micro s/c to chassis