Philips Repair Tips
Search: philips
Results: 14243
Results: 14243
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| PHILIPS |
28PW6324
A8.0E |
E/ is unstable and turns off | Sub c2634 =.022 =22n 630 volt | ||
| PHILIPS |
25PT4103
L6.3 |
Lines at the top of the screen | C2904 =100uf | Sub c2904 = 100μF | |
| PHILIPS |
21CE1051
CP90 |
No digits | Altered resistance | R 3890 = 2,7k or 1,5k | |
| PHILIPS |
28PT532A/11
GR 2.2 |
Image with colored contours | R3570 =6.8r RGB power supply 190 volt low only had 140 volt | Sub r3570 =6,8r | |
| PHILIPS |
VR 768
|
Not the image erases the cassettes | Transist y7500 = bc858 com fuga | Sub y 7500 = bc 858 | |
| PHILIPS |
GR 1AX |
Loses channels mainly in uhf | Mau contact inside the tuner | Sub tuner | |
| PHILIPS |
Turbo |
Initial sound deviation later presents cassette with tracked tape, with noise band in the image | The tape deviates from the head ctl audio | Sub pressor roller pay attention to certain rollers on the market | |
| PHILIPS |
VR 412
|
Doesn't start | Power supply c 120 =1000uf c121 = 100uf | Sub c 120 =1000 μF 16 volt c121 = 100 μF 16 volt | |
| PHILIPS |
VR 768
|
Not the image erases the cassettes | Transist y7500 = bc858 com fuga | Sub y 7500 = bc 858 | |
| PHILIPS |
28PW8501
MG 2.1 E |
Doesn't start | St/by power supply doesn't work | Fotocoplador 7104 = tcd1102 | |
| PHILIPS |
14GR1212
Gr1ax |
After line transf sub by hr7527 | Off-frequency sound noise | Put the tuner ground chant to pins 6e7 of ic 7103 = all 7052 | |
| PHILIPS |
14GR2325
G90 |
Oscillates badly destroys mat transistor r3453=100r | R3453 = 100r | ||
| PHILIPS |
14GR1212
Gr1ax |
After line transf sub by hr7527 | Off-frequency sound noise | Put the tuner ground chant to pins 6e7 of ic 7103 = all 7052 | |
| PHILIPS |
GR 1AX |
Loses channels mainly in uhf | Mau contact inside the tuner | Sub tuner | |
| PHILIPS |
CP 90 |
Without antenna dark scenery | Sub c 2630 =470μF | ||
| PHILIPS |
Gr1ax |
Lines in the image | Brightness failure | Kinescope ground plug ctr board poorly fitted | |
| PHILIPS |
25PT4103
L6.3 |
Doesn't start | C2012 = 2,2nf/2kv | Replace capacitor | |
| PHILIPS |
14GR1021
Gr1AX |
No syncs | C 2044 =2.2μF | ||
| PHILIPS |
25 ST 1760
GR 2.1 |
No image | Dark scenery board ctr bcs 848 | Sub bcs 848 | |
| PHILIPS |
32PW6006/01
L01.1 |
Has a faulty mat transistor | Bu4508 dx failure short time | Sub c2455 = 47μF e bu4508 dx = bu 2515 dx |