Philips Repair Tips
Search: philips
Results: 14238
Results: 14238
Make | Model | Symptom | Problem | Solution | By |
---|---|---|---|---|---|
PHILIPS |
CTO-L
|
Interference when in av | Integrated circuit ic200.**. small dark waves with or without signal, curl (like braid) cable 30, this cable connects the chroma plate to the of the trc and jumper coils s273, s276 and s279, if there is a reduction must be receiving interference | ||
PHILIPS |
CTO-L
|
Wave interference, like wood grain. | Power supply capacitor sops c616 open (680uf). * oct94 anc *. | ||
PHILIPS |
CTO-L
|
Interference in the image | Similar to flowery waves especially in the high channels (11 and 13), see cable m16 may be broken. 94 anc. in the bar pattern there are irregular black spots, Check fi pip module cable broken or disconnected. oct 94 anc. here | ||
PHILIPS |
CTO-L
|
Instability: varies frame, contrast, brightness, etc. | Image flickers typical of fi channel see m15 connector with internal spark. | ||
PHILIPS |
CTO-L
|
Flickering image (see serr1). | Ic101 see m16 cable may be broken. * Jul 94 BC *. c301 without open capacity. * Oct 94 BC *. capacitor c149 with cold soldering. * May 95 BC *. capacitor c420 open. * Jul 95 jdcc *. | ||
PHILIPS |
CTO-L
|
Jagged image (see train1). | C301 no capacity. oct 94 anc. | ||
PHILIPS |
CTO-L
|
Negative image. | Fi unit * June 95 ctr *. | ||
PHILIPS |
CTO-L
|
Image folded horizontally (-). | Altered resistor r425. * Aug 95 BC *. | ||
PHILIPS |
CTO-L
|
Scan with image | Ic208 out 94 anc. | ||
PHILIPS |
CTO-L
|
Dark band in the center of the screen (-). | Changed capacitor c342. * Jul 95 jdcc *. | ||
PHILIPS |
CTO-L
|
Strip in different positions (-) without defined color. | Changed capacitor c342. * Jul 95 jdcc *. | ||
PHILIPS |
CTO-L
|
Dos/menu - no color or different color. | Yellow ones and also pip, transistor ts356 (bfr31) changed. * 07Feb96 anc *. | ||
PHILIPS |
CTO-L
|
Dos / menu - does not leave the screen. | Kt401 or short between its terminals. *anc*. | ||
PHILIPS |
CTO-L
|
Dos/menu - running vertically. | Leaky transistor ts503. *anc*. | ||
PHILIPS |
CTO-L
|
Dos/menu - with confusing characters. | Ts501 may cause a single color to appear on the screen. *anc*. check strobe line open resistors r446/r020 and ic401. * Dec 94 BC *. | ||
PHILIPS |
CTO-L
|
Dos/menu - with changed characters. | Ts501 | ||
PHILIPS |
CTO-L
|
Turn off inter. or protect (rew 3 for vcr). | See m16 cable may be broken. *anc*. cold solder on: ts608/ts405/ts530. *anc*. | ||
PHILIPS |
CTO-L
|
Image delay when changing channels or when turning on. | Resistor r443 aberto. * 11jan96 anc *. | ||
PHILIPS |
CTO-L
|
Damage IC or TS semiconductor | Vl601/ts530 (power supply) see: c510 with little capacity. *anc*. d540 with escape. *anc*. r553 (470) open. *anc*. c541 open. *anc*. ts534 with leak between base and emitter. * Dec 94 BC *. d602 with cold welding or open. * Dec 94 jpba *. | ||
PHILIPS |
CTO-L
|
Damages resistor | Resistor r019 and micro damaged, possible short between D325 components panels and T7 cable 4 wire. * 06jan96 anc*. |