Search: philips
Results: 14238
Make Model Symptom Problem Solution By
PHILIPS CTO-L
Damage fuse Ts530 shorts out before damaging fuse (vl501) 4a see c510/c541. *anc*. vl501 opens intermittently without probable cause, see r510/r511. * anc*.
PHILIPS CTO-L
Clicks when turning off or on D626 with wrong value. * Oct 94 BC *.
PHILIPS CTO-L
Running bars on av 246 jump missing on the rear panel alive out 94 anc.
PHILIPS CTO-L
Poor contrast Ts430 transistor. * set 94 ctr *. trimpot r236, on luminance plate. * mai 95 jpba *. Non-integrated cold solder IC101 (pino28). * Jul 95 ctr *.
PHILIPS CTO-L
Commands act intermittently. Fuga em c430 out 94 anc.
PHILIPS CTO-L
With horiz shadows. on the entire screen Reel s908.**.
PHILIPS CTO-L
With vertical purple line. Verificar ic 391 no modulo pip. * 94 anc *.
PHILIPS CTO-L
With dark stripe at the bottom (_) Capacitor c346. * 20dez95 ctr *.
PHILIPS CTO-L
With vertical bar(s) or stripes Escape at d542 (low flight). * jan 95 jdcc *.
PHILIPS CTO-L
Drizzle on all channels (see ganh1) R150/c125
PHILIPS CTO-L
Blocking flashing See m16 cable may be broken, causing sparking and causes blocking. *anc*. resistor r318 on the micro stan board. * 10jan96 anc *. leaky capacitor c311. * 09Oct96 ctr *.
PHILIPS CTO-L
Heating transistor Ts405 heating up, probable short in t440 out 94 anc.
PHILIPS CTO-L
Heating resistor C422 causes r428 to heat up.
PHILIPS CTO-L
Whistles when changing channel = bell Trimpot r016 altered, occurs when the activation of the stereo function, especially when changing channels. * Dec 94 anc*.
PHILIPS CTO-L
After a while the image disappears Resistor alterado r565 (8,2e). * 10jan96 anc *. capacitor c280 (1uf) intermitente. * 08jan97 anc *. verificar transistor ts235. * 20jun97 jdn *.
PHILIPS CTO-L
Intermittent whistle Usually a mechanical ferrite problem, check fly back cracked (s440) and horizontal linearity coil (s431), Suggestion is to install a cracked or poorly fixed ferrite collar. * Dec 94 BC *
PHILIPS CTO-L
Apito em stand by Saida surround apita r254/r255 out 94 anc.
PHILIPS CTO-L
Dots appear that cover the screen. Green dots after heating and then turn black, integrated vertical output (ic302) causing noise on the line from sand castle. * conf. Jul 95 BC *
PHILIPS CTO-L
Appears in the / menu, however, without an image. Lack of +12vs from sops, see possible broken track on t500 pin 2. *out 95 anc*. Integrated IC200. * 10jan96 anc *.
PHILIPS CTO-L
Activating crowbar. Ts611 out 94 anc. diodo d603 alterado. * 04jan96 anc *.