Philips Repair Tips
Search: philips
Results: 14206
Results: 14206
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| PHILIPS |
CTO
|
Does not go into stand by. | Transistor com fuga ts001 (vst). * ago 95 anc *. | ||
| PHILIPS |
CTO
|
It doesn't turn off via CR, sometimes just the sound disappears. | Oxidized terminals of ts368, poor contact. * 26jan96 anc *. | ||
| PHILIPS |
CTO
|
Does not correct east-west | Capacitor c515. * mai 95 ctr *. | ||
| PHILIPS |
CTO
|
Does not operate analog controls. (see also reco4) | Broken track (clock) pin 4 of ic102 (sab3013). * 26jan96 anc*. leak in ts050, +5b supply with 7v. * 26jan96 anc *. short between sda and sck tracks pin 4 and 5 of ic102. * 26jan96 anc *. | ||
| PHILIPS |
CTO
|
Does not have a tuning bar | Resistor r101 integrated: IC292/IC664/IC921/IC924 ts905 transistor inversion of cable n3 on another terminal. *jun 95 anc* transistor TS067 open base/emitter. * Jul 95 jdcc *. Integrated IC101. * nov 95 ctr *. | ||
| PHILIPS |
CTO
|
Does not adjust the volume | R666 | ||
| PHILIPS |
CTO
|
Stand by LED does not light up (device off) | Transistors on the VST TS005/TS009 board, with leakage. **. | ||
| PHILIPS |
CTO
|
Does not accept remote commands | Remote receiver unit. check the possibility of poor contact in the z6 connector, Weld directly to avoid failures. altered 5v1 zener diode d001, leaky diode d006, or resistor r049 open. * 27Dec95 BC *. | ||
| PHILIPS |
CTO
|
Does not open vertically | Resistor r404.**. capacitors c406/c306/c408. **. integrated circuit ic400.**. conf. nov 95 ctr integrated circuit ic875.**. resistor r590. * mai 95 ctr *. cold soldering possible on ic875 and ic400. *jun 95 ctr*. cold welding in ca | ||
| PHILIPS |
CTO
|
Horizontal lines (bottom or top). | Capacitor c400. * 94 anc *. conf. jul 95 ctr circuito integrado ic400. **. conf. nov 95 ctr resistor r400, capacitor c410 com fuga. * anc *. r405 aberto. * 15jan96 anc *. | ||
| PHILIPS |
CTO
|
Return lines (retraction). | Check open resistor r583. *jun 95 anc*. capacitor c409 open. * 26jan96 anc *. | ||
| PHILIPS |
CTO
|
Flashing stereo led. | Modification in the output panel: canceling ro34 b open track between 1 of p67 and 5 of ic012 c connect 2 and 5 of ic012 d connect 4 from ic012 to p67 and connect 10 and 12 of ic010 f readjust r223 level on the stereo panel: canceling d2 | ||
| PHILIPS |
CTO
|
Sap led lights up incorrectly. | Add 47k resistor in parallel with r209.** | ||
| PHILIPS |
CTO
|
LED indicating inverted. (on off off on) | Check ts006 with leak. * 10oct97 jpba *. | ||
| PHILIPS |
CTO
|
Excess width | Capacitor c507.** | ||
| PHILIPS |
CTO
|
Interference in the image | Das model: with noise as if two were switching bands fit r114 acg. *anc* all models with board vst= ts050/ts053, ic100. *anc* granulated, see coil s138. * mai 95 ctr *. only channels 5 and 7 see u102. * 26jan96 anc *. see | ||
| PHILIPS |
CTO
|
Indica 18 | Altered or open resistors r001, r002 and r003. ** leaky transistor ts029. *anc*. leaky capacitors c044 and c045. *anc*. indicates 18 and turns off, see timer (ic or ts). *anc*. solder short from pin 20 to 21 of the micro. * 04jan96 anc | ||
| PHILIPS |
CTO
|
Flickering image (see serr1). | Capacitor c868 (4.7uf) *. Integrated IC875. * Jul 95 ctr *. d306 shorted. * 26jan96 anc *. capacitor c587. * 05nov96 fr *. check open capacitor c146. * 25Aug97 jpba *. check integrated ic151. * 18Sep97 ctr *. | ||
| PHILIPS |
CTO
|
Negative image. | Check capacitors c587 (470uf) and c221 (150uf). *anc*. | ||
| PHILIPS |
CTO
|
Intermittent negative image. | IC292 integrated circuit. *jun 95 ctr*. |