Search: philips
Results: 14238
Make Model Symptom Problem Solution By
PHILIPS CTO
Does not open vertically Resistor r404.**. capacitors c406/c306/c408. **. integrated circuit ic400.**. conf. nov 95 ctr integrated circuit ic875.**. resistor r590. * mai 95 ctr *. cold soldering possible on ic875 and ic400. *jun 95 ctr*. cold welding in ca
PHILIPS CTO
Horizontal lines (bottom or top). Capacitor c400. * 94 anc *. conf. jul 95 ctr circuito integrado ic400. **. conf. nov 95 ctr resistor r400, capacitor c410 com fuga. * anc *. r405 aberto. * 15jan96 anc *.
PHILIPS CTO
Return lines (retraction). Check open resistor r583. *jun 95 anc*. capacitor c409 open. * 26jan96 anc *.
PHILIPS CTO
Flashing stereo led. Modification in the output panel: canceling ro34 b open track between 1 of p67 and 5 of ic012 c connect 2 and 5 of ic012 d connect 4 from ic012 to p67 and connect 10 and 12 of ic010 f readjust r223 level on the stereo panel: canceling d2
PHILIPS CTO
Sap led lights up incorrectly. Add 47k resistor in parallel with r209.**
PHILIPS CTO
LED indicating inverted. (on off off on) Check ts006 with leak. * 10oct97 jpba *.
PHILIPS CTO
Excess width Capacitor c507.**
PHILIPS CTO
Interference in the image Das model: with noise as if two were switching bands fit r114 acg. *anc* all models with board vst= ts050/ts053, ic100. *anc* granulated, see coil s138. * mai 95 ctr *. only channels 5 and 7 see u102. * 26jan96 anc *. see
PHILIPS CTO
Indica 18 Altered or open resistors r001, r002 and r003. ** leaky transistor ts029. *anc*. leaky capacitors c044 and c045. *anc*. indicates 18 and turns off, see timer (ic or ts). *anc*. solder short from pin 20 to 21 of the micro. * 04jan96 anc
PHILIPS CTO
Flickering image (see serr1). Capacitor c868 (4.7uf) *. Integrated IC875. * Jul 95 ctr *. d306 shorted. * 26jan96 anc *. capacitor c587. * 05nov96 fr *. check open capacitor c146. * 25Aug97 jpba *. check integrated ic151. * 18Sep97 ctr *.
PHILIPS CTO
Negative image. Check capacitors c587 (470uf) and c221 (150uf). *anc*.
PHILIPS CTO
Intermittent negative image. IC292 integrated circuit. *jun 95 ctr*.
PHILIPS CTO
Image warps like saturated agc. Integrated IC151. * Jan 95 BC *. Integrated IC875. * Jul 95 ctr *.
PHILIPS CTO
Image erased like weak kinescope. Trc, check that the s750 core has not been lost, This causes premature weakening. * 26jan96 anc *.
PHILIPS CTO
Turns pink with weak or no signal. Possible leak in capacitor c216. *anc*.
PHILIPS CTO
Becomes dark with weak or no signal. Capacitor c232 (270nf) aberto. * anc *. capacitor c221 (150uf) alterado. * anc *. capacitor c587 (470uf) alterado. * 11jan96 anc *
PHILIPS CTO
Turns gray with weak or no signal. Check capacitors c587 (470uf) and c221 (150uf). *anc*.
PHILIPS CTO
Light band in the center (i) varies with brightness/cont. Capacitor c205 without capacity. * Jul 95 jpba *.
PHILIPS CTO
Shutter effect. Td210. ** resistor r229. *out 95 ctr*. td210 fitted in incorrect position on the printout. * 26jan96 anc*.
PHILIPS CTO
Cushion effect. R513/r515