☰

Philips Repair Tips




AIWA
BEKO
CCE
CINERAL
DAEWOO
FUNAI
GRADIENTE
GRUNDIG
HITACHI
ITT
JVC
LG
MITSUBISHI
PANASONIC
PHILCO
PHILIPS
PIONEER
RCA
SAMSUNG
SANYO
SHARP
SONY
THOMSON
TOSHIBA
VESTEL


Search: philips
Results: 14238
Make Model Symptom Problem Solution By
PHILIPS CTO
Small frame Diode d305. ** transistor ts610. ** s564 with broken ferrite core. * Jan 95 BC *. OK bad contact broken solder on j050. * Jul 95 ctr *.
PHILIPS CTO
Frame sparkling with expanding "bloom". Check pin 7 track of s564 cracked. * Dec 94 BC *.
PHILIPS CTO
Little brightness when turning on Check capacitor c221 (150uf) and c587 (470µf) changed (+12v filter). * 26jan96 anc *.
PHILIPS CTO
Loses contrast with tuning bar or dos. R585 amended. r077/r078/r079. c587 (470uf) with little capacity. * nov 94 ac *.
PHILIPS CTO
Wind foot with/image of broadcaster Capacitors c890/c891.* *. Integrated IC875. * Jul 95 ctr *.
PHILIPS CTO
There are no colors Ic200 modif. c870 para 3k3 e r870 22k c210/c216/c223/c228/c292/c294/c295 xr233 dl210
PHILIPS CTO
Does not hold memory (loses information). Battery Leakage in the ts015/ts016 transistors. capacitors c003 leak. integrated ic100 diodes d002/d016. leak in capacitor c002. * 26jan96 anc *.
PHILIPS CTO
Does not come out of intermittent stand by, or does not turn on. C002/c006 xr004 ic100 ts016 ts003 with leak (timer circuit). * nov 94 ac *. start key or cable with bad contact. Nov 95 jpba *. intermittent capacitor c022 (1uf). 06dec95 anc/emm *. capacitor c001 (68uf) changed. * 15jan96 anc *.
PHILIPS CTO
Does not turn on via remote control. Transistor ts003 open. * 26jan96 anc *.
PHILIPS CTO
Does not work when cold. Check leak in ts007 and ts009. *94 anc*.
PHILIPS CTO
Does not work in audio and video Integrated IC090 (20CT6555/7/8). *anc*. check jump on a76 pin 1 to 3. * jan 95 anc *.
PHILIPS CTO
It doesn't work (it stays off). Leaky capacitors: c325/c319/c330/c587 capacitor c370 open. * nov93 jpba *. diode d790 open or altered resistors: r340/r341/r300/r895/r893 leaky transistors: ts550/ts564 fly back short. * mai 95 mjs *. open trail
PHILIPS CTO
Does not go into stand by. Transistor com fuga ts001 (vst). * ago 95 anc *.
PHILIPS CTO
It doesn't turn off via CR, sometimes just the sound disappears. Oxidized terminals of ts368, poor contact. * 26jan96 anc *.
PHILIPS CTO
Does not correct east-west Capacitor c515. * mai 95 ctr *.
PHILIPS CTO
Does not operate analog controls. (see also reco4) Broken track (clock) pin 4 of ic102 (sab3013). * 26jan96 anc*. leak in ts050, +5b supply with 7v. * 26jan96 anc *. short between sda and sck tracks pin 4 and 5 of ic102. * 26jan96 anc *.
PHILIPS CTO
Does not have a tuning bar Resistor r101 integrated: IC292/IC664/IC921/IC924 ts905 transistor inversion of cable n3 on another terminal. *jun 95 anc* transistor TS067 open base/emitter. * Jul 95 jdcc *. Integrated IC101. * nov 95 ctr *.
PHILIPS CTO
Does not adjust the volume R666
PHILIPS CTO
Stand by LED does not light up (device off) Transistors on the VST TS005/TS009 board, with leakage. **.
PHILIPS CTO
Does not accept remote commands Remote receiver unit. check the possibility of poor contact in the z6 connector, Weld directly to avoid failures. altered 5v1 zener diode d001, leaky diode d006, or resistor r049 open. * 27Dec95 BC *.