Search: philips
Results: 14238
Make Model Symptom Problem Solution By
PHILIPS 29SX8879
Varying or intermittent brightness Check capacitor 2180. 04may01 rj610 ademir *.
PHILIPS 29SX8879
Whistle in operation (see noise8). Check tsh 5900. * 05jan96 mjs *. check capacitor 2905 (39nf) touching components next. *04Oct96 man*.
PHILIPS 29SX8674
Voltages below the specified (vo, +b,..) Check resistors 3134 and 3136 (open) or 7140. * 25Jul96 jpba *.
PHILIPS 29SX8674
Dark "black" screen (see also bril4). Integrated 7467 tda4651, pin 15 with 8v, normally and 1.5v (sand castle). * oct 95 jpba *. capacitor smd 2573 (220nf) with leakage (approx. 250k). 26Oct95 anc*. see resistor 3550. * 30jul96 jpba *.
PHILIPS 29SX8674
Blue fabric With Philips inscription, problem caused by lack of timing, integrated 7750 (tda2595). * 13dec95 jpba *. check transistor 7320 (without + 5v). * 22Aug97 jpba *.
PHILIPS 29SX8674
Yellow screen (no blue) Capacitor 2573 (220nf) smd com fuga (com 250k). 26out95 anc
PHILIPS 29SX8674
Low sound. In the surround output, replace 3612 and 3613 to 10k. 04Oct96 man*.
PHILIPS 29SX8674
Sound has a whistling or buzzing sound. See 7621. * 30jul96 jpba *.
PHILIPS 29SX8674
"Philips" only appears on the screen. Check integrated 7750 (tda2579). * 30Jul96 jpba *. c2128, t7130. *01Sep98 mg601*
PHILIPS 29SX8674
No voltage (vo, +b, hvt, etc.). +b 285v, ver fusiveis 1100 e 1125. * 25jul96 jpba *.
PHILIPS 29SX8674
No sound. (with or without image for TV, VCR). See integrated 7145. * 30jul96 jpba *.
PHILIPS 29SX8674
No h/v sync. Integrated 7750 (tda2595). * 13dez95 jpba *.
PHILIPS 29SX8674
Sem beep Fuse 1301, +13 power supply open. *may 95 jpba*.
PHILIPS 29SX8674
Bright spot when turning off or stains. Check fly back welding, control line pin focus and g2 with bad contact or without soldering. * Jan 95 BC *.
PHILIPS 29SX8674
Panel without lighting. 1911 or 1912 lamps open, replace them with 4822 134 40861 changing resistors 3913 and 3914 to 56r. * 15Jul99 nk *.
PHILIPS 29SX8674
There is no contrast Capacitor 2960 open. * Apr 95 jpba *. integrated 7530. * oct 95 jpba *. obs. normal pip.
PHILIPS 29SX8674
Does not change the switching. Transistor 7110. * 20dez95 mjs *.
PHILIPS 29SX8674
Does not work on 110v. Integrated 7110 (str80145). * 20jul95 jdcc *.
PHILIPS 29SX8674
It doesn't work (it stays off). When switching off, the protection indicates er13 and there is no sound, check 7233 (vbe does not work) replace it and add a diode between collector and emitter, with the cathode side being the collector. starting resistor 3136 open. * Apr 95 jpba *. 7110 (str8145a) open
PHILIPS 29SX8674
Does not correct east-west 7980 Sep 94 jdcc. check 5980 core without ferrite. * 16Jul99 azs *.