☰

Philips Repair Tips




AIWA
BEKO
CCE
CINERAL
DAEWOO
FUNAI
GRADIENTE
GRUNDIG
HITACHI
ITT
JVC
LG
MITSUBISHI
PANASONIC
PHILCO
PHILIPS
PIONEER
RCA
SAMSUNG
SANYO
SHARP
SONY
THOMSON
TOSHIBA
VESTEL


Search: philips
Results: 14251
Make Model Symptom Problem Solution By
PHILIPS 29SX8674
Sound has a whistling or buzzing sound. See 7621. * 30jul96 jpba *.
PHILIPS 29SX8674
"Philips" only appears on the screen. Check integrated 7750 (tda2579). * 30Jul96 jpba *. c2128, t7130. *01Sep98 mg601*
PHILIPS 29SX8674
No voltage (vo, +b, hvt, etc.). +b 285v, ver fusiveis 1100 e 1125. * 25jul96 jpba *.
PHILIPS 29SX8674
No sound. (with or without image for TV, VCR). See integrated 7145. * 30jul96 jpba *.
PHILIPS 29SX8674
No h/v sync. Integrated 7750 (tda2595). * 13dez95 jpba *.
PHILIPS 29SX8674
Sem beep Fuse 1301, +13 power supply open. *may 95 jpba*.
PHILIPS 29SX8674
Bright spot when turning off or stains. Check fly back welding, control line pin focus and g2 with bad contact or without soldering. * Jan 95 BC *.
PHILIPS 29SX8674
Panel without lighting. 1911 or 1912 lamps open, replace them with 4822 134 40861 changing resistors 3913 and 3914 to 56r. * 15Jul99 nk *.
PHILIPS 29SX8674
There is no contrast Capacitor 2960 open. * Apr 95 jpba *. integrated 7530. * oct 95 jpba *. obs. normal pip.
PHILIPS 29SX8674
Does not change the switching. Transistor 7110. * 20dez95 mjs *.
PHILIPS 29SX8674
Does not work on 110v. Integrated 7110 (str80145). * 20jul95 jdcc *.
PHILIPS 29SX8674
It doesn't work (it stays off). When switching off, the protection indicates er13 and there is no sound, check 7233 (vbe does not work) replace it and add a diode between collector and emitter, with the cathode side being the collector. starting resistor 3136 open. * Apr 95 jpba *. 7110 (str8145a) open
PHILIPS 29SX8674
Does not correct east-west 7980 Sep 94 jdcc. check 5980 core without ferrite. * 16Jul99 azs *.
PHILIPS 29SX8674
Mute does not work (out of sync or without antenna). Fuse 1301 open. * 20Jul95 jdcc *.
PHILIPS 29SX8674
Return lines (retraction). Check fly back control pin g2, it may be faulty poor contact or no soldering. * Jan 95 BC *. ic7705 (tda2579b). *03Sep98 al142*
PHILIPS 29SX8674
Interference in the image Bars rising on the screen, add a 12nf capacitor in parallel with the demagnetizing coil. *04Oct96 man*.
PHILIPS 29SX8674
Negative image. Check resistor 3362 open from +12. * 04Jul96 jpba *.
PHILIPS 29SX8674
Banners going up on the screen. Leakage not diode 6530. * 04jul96 jpba *.
PHILIPS 29SX8674
Display or dos indicates error. Er13 = see +13 (m17 pin 8) and fuse 1301. * 30jul96 jpba. er5 = see pip module (you can change the er number). 30Jul96 jpba.
PHILIPS 29SX8674
Turn off inter. or protect (rew 3 for vcr). Trafo 5945, may be without a nucleus. * mai95 jpba *.