Search: philips
Results: 14238
Make Model Symptom Problem Solution By
PHILIPS 20CT6557
Stereo LED lights up on all AV channels. Possible leak in the integrated ic012 (hef4066). * Apr 95 BC *.
PHILIPS 20CT6557
Stereo led lights up in mono. Check IP67 connector, if there is a modification to not random lighting, check pin 1 track of p67, with escape. *oct 95 anc*.
PHILIPS 20CT6557
Led balance indicates (left) on channels 1,4,7,11. Transistor ts027 (bc558) com fuga. * ago 95 anc *.
PHILIPS 20CT6557
Interference not som Sound from channel 2 invades channels with weak signal, mainly in uhf, check the interconnection cable of the qss module; usually touches the central wire to the shield of the module, or it shorts out at the welding point on the single panel. * Apr 95 BC *.
PHILIPS 20CT6557
Turns off immediately after turning on. Verificar capacitor do timer c055 (27nf). * abr 95 anc *.
PHILIPS 20CT6557
Turns off when changing channels Check intermittent ic100. * nov 94 ac *.
PHILIPS 20CT6557
It takes time to change roles. Possible leak in the li/lii switch. * mai 95 anc/ctr *.
PHILIPS 20CT6557
Takes time for digits to appear Integrated IC 035. ** Leakage in transistors TS007 and TS009. * 26fe 96 anc *.
PHILIPS 20CT6557
Damage fuse Vl002, check capacitor c372 for short. * Jul 95 BC *.
PHILIPS 20CT6557
Channel does not change (locks on one channel) Occurs when pressing the +channel key, when reaching channel 10 it stops losing color and brightness (intermittent), this defect and typical of cold soldering between the terminal of the resistor +12 (r585) with its fixing terminal. *anc*
PHILIPS 20CT6557
When turning on, a loud noise appears Cape c31 match. * 26jan96 anc *.
PHILIPS 20CT6555
Dark "black" screen (see also bril4). Leaky transistor (AV board) ts119. *anc*. audio and video module, integrated ic005. * 20Dec95 ctr *.
PHILIPS 20CT6555
Gray screen (no video) Capacitor c515. * mai 95 ctr *.
PHILIPS 20CT6555
Distorted or noisy sound. Integrated IC030 (HEF4052). * Jul 95 anc *.
PHILIPS 20CT6555
It only works when cold. Fuga no diodo d80. * out 95 anc *.
PHILIPS 20CT6555
No sound. (with or without image for TV, VCR). Device that has undergone stereo modification, see printout In older models, there is no connection from r662 to pin 14. * 94 anc *. diode d010 open. * 26jan96 anc *.
PHILIPS 20CT6555
Noise in sound Ic012 capacitor c004. *94 anc*. ic80 (sound one of the channels). *Jan 95 acm*.
PHILIPS 20CT6555
Does not work in audio and video If the stereo has been modified, check a76 cable, if necessary, jump pins 1 and 3. * 94 anc *. see cable a73, or front AV/RGB switch. * 26jan96 anc *.
PHILIPS 20CT6555
Right channel doesn't work Stereo kit modification device with old plate see socket a66 add two missing pins.
PHILIPS 20CT6555
Li/lii or sap key does not work. Check the soldering point of pin 28 of the ic100 (it must be open). * 08/20/94 anc *.