Search: philips
Results: 14206
Make Model Symptom Problem Solution By
PHILIPS 29GX1898/78R
Just tune in to channel 2. Check open resistor 3648.
PHILIPS 29GX1898/78R
No voltage (vo, +b, hvt, etc.). Check possible leak in the 6511 diode
PHILIPS 29GX1898/78R
Poor width Transistor 7480 (bd136) e 7481 (bc548).
PHILIPS 29GX1898/78R
Poor width Capacitor 2456 (47pf)
PHILIPS 29GX1898/78R
Poor width 3427 resistor open.
PHILIPS 29GX1898/78R
Indicates error (er..). Er14, 3452 open resistor
PHILIPS 29GX1898/78R
Jagged image. 6526 open diode
PHILIPS 29GX1898/78R
Dark band on the left side. Capacitor 2456 (47pf) open
PHILIPS 29GX1898/78R
Turn off inter. or protect (rew 3 for vcr). Leaky 6446 diode.
PHILIPS 29GX1898/78R
Damage IC or TS semiconductor Vertical integrated 7400, check changed resistor 3511 (24k), at the power supply.
PHILIPS 29GX1898/78R
Flashing contrast Check resistor 3460 and capacitor 2462
PHILIPS 29GX1898/78R
Poor contrast Check resistor 3460 and capacitor 2462
PHILIPS 29GX1898/78R
Command only works when the key is pressed directly. Check leaking capacitor 2624
PHILIPS 29GX1898/78R
With dark stripe in the center Tda 8361 for mask n4, run inf 06ct94-18 for gr1-l1
PHILIPS 29GX1898/78R
Turning off flashing Screen darkens every 10 sec. approx. see capacitor line 2456 open.
PHILIPS 29GX1898/78R
LED(s) flashing. (repeatedly) Flashes 6x = check power supply module.
PHILIPS 29GX1898/78R
Thin line in the center (horizontal). Check regulator 7218.
PHILIPS 29GX1898/78R
Lines moving on the screen (vertical). Information psc replace capacitor 2456 for 82pf
PHILIPS 29GX1898/78R
Vertical thin lines. Capacitor 2456, if it is 47pf, change it between values ​​of 56 and 82pf
PHILIPS 29GX1898/78R
Does not accept remote command Check open resistor 3456.