Search: philips
Results: 14251
Make Model Symptom Problem Solution By
PHILIPS 29GX1898/78R
LED(s) flashing. (repeatedly) Flashes 6x = check power supply module.
PHILIPS 29GX1898/78R
Thin line in the center (horizontal). Check regulator 7218.
PHILIPS 29GX1898/78R
Lines moving on the screen (vertical). Information psc replace capacitor 2456 for 82pf
PHILIPS 29GX1898/78R
Vertical thin lines. Capacitor 2456, if it is 47pf, change it between values ​​of 56 and 82pf
PHILIPS 29GX1898/78R
Does not accept remote command Check open resistor 3456.
PHILIPS 29GX1898/78R
No characters/menu appear. Check open resistor 3456.
PHILIPS 29GX1898/78R
No characters/menu appear. Check capacitor 2456 (47pf) open
PHILIPS 29GX1898/78R
Does not work (it remains switched off). Check 5445 (flyback).
PHILIPS 29GX1898/78R
Does not work (it remains switched off). Check open resistor 3444.
PHILIPS 29GX1898/78R
Does not work (it remains switched off). Check 7218 (tda7808) open.
PHILIPS 29GX1898/78R
Does not work (it remains switched off). Check power supply control module.
PHILIPS 29GX1898/78R
Does not work (it remains switched off). Check 5441
PHILIPS 29GX1898/78R
Does not work in audio and video Integrated 7225 (tda8361).
PHILIPS 29GX1898/78R
Has no colors Check pins 17 and 18 of the computer, possible with soldering between the two terminals.
PHILIPS 29GX1898/78R
Has no colors Check open capacitor 2456 (47pf).
PHILIPS 29GX1898/78R
No width (no hor deflection) vertical risk. M5 cable with poor contact.
PHILIPS 29GX1898/78R
Without horizontal synchronization. Check crystal switching, resistor 3697 open.
PHILIPS 29GX1898/78R
Without horizontal synchronization. Check if one of the crystal transistors 3, 57. is conducting, if not, check the programming table and the micro.
PHILIPS 29GX1898/78R
No tune = channel/station just noise/mute. Check open resistor 3010.
PHILIPS 29GX1898/78R
No tune = channel/station just noise/mute. Check open resistor 3452.