Samsung Repair Tips
Search: samsung
Results: 3802
Results: 3802
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| SAMSUNG |
LN40B650
|
No image | Does not work reverse | Ci sem2006 replace | vitaltec |
| SAMSUNG |
CL-21Z50MQ
|
Heating vertically and horizontally | Replace the shorted 24v zener diode d302 | gelson | |
| SAMSUNG |
CL-21Z58MQ
|
Stand by led does not light up | Chap. 905 short | marcos soares | |
| SAMSUNG |
32Z30
|
Frame varying in height/width/image drizzling | Dz 801 tl 431 on pci power supply | warley cesar | |
| SAMSUNG |
CL29Z43MQ
|
Burning horizontal output as soon as it turns on | Shorted flyback | haecio | |
| SAMSUNG |
CB337Z
SCT11D |
+b com 190v | C851 22uf 35v | ZENER | |
| SAMSUNG |
CL-21Z58MQ
|
Image in half (dark bottom), but when I open the menu the characters appear. | Epron (memory). | Replace and enter into service (stand by mute,1,8,2,power) and adjust. a big hug! | pernambucano |
| SAMSUNG |
CM-3315Z
|
Vertical folding at the bottom of the image. | R-313 = 39k, no pino 2 do ic vertical. | FERNANDO S | |
| SAMSUNG |
LN32B350
|
Normal sound without image lamps off | Pulse missing on pin 16 of the sem2006 integrated | Place a 4.7k resistor from pin 16 of the sem2006 reference integrated circuit to the invert pin of the connector | Roberto consertos |
| SAMSUNGUE |
CL29Z30
|
Burning or resistor r423 | C 404 | Replace c404 | noel batista |
| SAMSUNG |
540N/740N
IP 35135B |
Turns on without image or power blinks | Power supply capacitors with 90% problems and check c341 to c344 | Replace all capacitors, even the nverterv25v x 220μF line...find out more http://notebrasil.blogspot.com | bynelsinho |
| SAMSUNG |
CL 29K40MQ
|
TV The stand-by LED does not light up the TV, triggering the protection. | I replaced the c.815 and the TV started working normally again. | joaquim rosa ELETRONICA CAMPESTRE GOIAS | |
| SAMSUNG |
CL21Z5OMQ
|
Cushion effect | R411 | Just replace the 82k resistor and also check the service menu | gemerson garanhuns |
| SAMSUNG |
LN-26330J1
|
With sound and frozen image | Cold soldering on the LCD board (you can't see it) | The board that is attached to the LCD was resoldered and it was ok | Fábio Andrade |
| SAMSUNG |
540N
|
The monitor screen does not turn on, only the standby LED | Depleted electrolytic capacitors (in power supply) c113 820uf x 25v c115 1000uf x 10v c212 330uf x 25v | By changing the capacitors it works normally again. | Gilnei |
| SAMSUNG |
LN19A330J1
|
Does not turn on and the LED does not light up | R802 de 75k | A 56k one was placed in series with an 18k =74k one (in case your workshop lacks the correct value) | Gilnei |
| SAMSUNG |
CL29K40MQ
|
When turned on, after + - 30 sec. it turned off; checked ic801s overheating. | Detected in the primary power supply, c803 without capacitance, tsound is an excessive current in the ic801s causing it to heat up much beyond normal. | Replaced the c803(330/400v) at the power supply, the ic801s stopped heating; the TV was ok. | CLAYTON |
| SAMSUNG |
CN-7202WB
|
Turning off 8817 | Screen | Increase screen | marcos melo cascavel ceara |
| SAMSUNG |
CL21M21M
|
Inoperative. | When searching, I found the horizontal output shorted, replaced it, it worked with a reduced frame. | Changing the horizontal transistor and cap. 5.5n/1600v replaced. | PAULÃO-SERTANEJA |
| SAMSUNG |
732NW
|
Turns on but has no image or brightness | C301 e f301 a berto | Replace | EletroClaudio Aguas Belas |