Search: samsung
Results: 3802
Make Model Symptom Problem Solution By
SAMSUNG 21Z58
Device turns on normally, panel keys inoperative channel keeps changing, sometimes it keeps turning on and off On/off key with conduction Replace touch key Roberto Consertos
SAMSUNG CN3339VB
Turns on but no image or sound, increasing the screen appears blurry. Change the tda8356 vertical ci Diego Uczak
SAMSUNG CL29K40MQ
Turns on and then turns off and tsound is only sound I changed the capacitor you suggested, it was great, I solved the problem and I'm not even a technician, thank you very much Celson
SAMSUNG CL21K40MQ
22222
On, 3 seconds off; warming up r424 6.7km scheme 200k but no chassis 6.7k abl line 8817 Abl with 160v normal was for 9 or 6 v; it was a track d r202 n line d abl changing voltage burning r424 Shave trail p n vasa but high current p abl marcos melo cascavel ce
SAMSUNG 21K40
Power supply does not oscillate +b zero Check the two 33k resistors on the regulator start pin Master Eletronica
SAMSUNG CN5039VB
KCT12A
Volume bar does not work Swap memory Memory maurijunior
SAMSUNG 29K40
No shine just sound C410 Replace c410 of 470μF x 25v close to the fly back Roberto Consertos
SAMSUNG CN5039VB
KC12A
No sound volume bar does not work But reset But reset ELETRONICA MAURI JUNIOR
SAMSUNG CN5039VB
KCT12A
With interference on the screen and does not pick up AV channels, no image and sound C232 2,2x50v C232 ELETRONICA MAURI JUNIOR
SAMSUNG CL21Z43MQ
Running away from tune (image goes in and out) Varicap power resistors (+33v) Replace r829,839,831(15k-1,2w) Marcelo Jose
SAMSUNG CL21Z58
Reduced frame on the sides with distortions on both sides of the menu Q 404(9d5n20p) replace the same This email address is being protected from spambots. You need JavaScript enabled to view it.
SAMSUNG LN32A450C1
Going out of tune Change c.1015,100/16v above varicap jps eletr.c.grande
SAMSUNG CL21M6MQ
Black screen with characters 100k open r423 thejotta
SAMSUNG CW29A116V
S61A
Turns on and off, it always beeps when it starts and then goes off. La7845 vertical Replace for new funkey
SAMSUNG CN 3338V
Image distorted and was sometimes black and white Cause cap.246 2.2/50v note I put a 4.7/50v one francisco.s
SAMSUNG 632 NW
It doesn't turn on, the standby LED keeps flashing Changed power supply capacitors, c=109/c=110, both 1000mf/10 v If, by chance, c=109/110 has been replaced and it still doesn't turn on, replace the rest of the power supply capacitors, which are c=107/111/114, in short, all in the power supply area. geraflorem
SAMSUNG 793V
Intermittent on and off Voltage regulator from 13 to 5v Replace the regulator Til Mirto
SAMSUNG CL29Z43MQ
Dark screen. Measuring the screen I found 140 volts I replaced the 508 capacitor in the tube socket, the voltage returned to normal. and we jumped for joy!!! Eletronica Casa Dos Monitores Itumbiara ltda
SAMSUNG CN5039CV
Turns on, turns off by itself Short vertical Replace ci do vertical This email address is being protected from spambots. You need JavaScript enabled to view it.
SAMSUNG 21K40
This TV arrived sound with a strange chirping noise as if it were on the flaybak, I tested the capacitors around the flaybak and everything was ok, then I noticed some sparks in the deflector, which killed the defect. This deflector doesn't sell new, so I put a CCE deflector but it doesn't open all the way and tsound's a finger missing from the top and bottom. Then open the service mode [ when the TV is on standby press the control; mute,182,power that will turn on in service mode and just regulate and exit for hug eletronica rosa de saron aracaju - se / Daniel levita