Search: samsung
Results: 3847
Make Model Symptom Problem Solution By
SAMSUNG VOYAGER 10
St/by only - no relay drive Tuner/timer chip pt no 32-213-257sip
SAMSUNG VARIOUS
Entering service modes Press standby, display, menu, mute, standby
SAMSUNG VARIOUS
Entering service modes Press standby, display, menu, mute, standby press standby, picture standard, help, sleep, standby
SAMSUNG U88MT-1
Not cabbage No 5v at pin 1&9 ic502 tda4661 del line chip. d503 5v zener leaky
SAMSUNG U88MT CI6230WN
Poor start up and/or no stby, led is off C806 100uf 25v (pin 9 tda4601)
SAMSUNG U88MT CI6230WN
Int. goes on/off to stby C831 220uf 200v
SAMSUNG TVP5050IST SCV11F
Sigs int lost with line of instability Tuner - can check it by swapping them over (2 identical ones incorporated in this set)
SAMSUNG TVP5050
Reverts to st/by aft pic displayed for a few secs Lighthouse led not working - faulty
SAMSUNG TVP33601
Field foldover at top Check r409 0r22, r303 10r ½w from 46v supply
SAMSUNG TVP3350IT
Not recording sound on timer recordings Replace micro ic901 cxp85332a1966 and set option codes for this model: option 1 193, option 2 32
SAMSUNG TVP3350I
St/by only No volts to ic901 pin 64, d901 in4148 leaky
SAMSUNG TVP33501T
No text Enter service mode and enter 209 in option 1 and 34 in option 2
SAMSUNG TVP33501S
Int off & long time to come on from mains sw on Ic801 opto coupler
SAMSUNG TVP33501
No signals Check dry joints tuner around coils & xtal etc
SAMSUNG TI20C5DF2S/XEV
Dead except for cycling on/off of degaus relay C414 680pf 2kv burnt & leaky in lop stage
SAMSUNG TI20C5DF2S/XEV
Dead except for cycling on/off of degaus relay C414 680pf 2kv burnt & leaky in lop stage
SAMSUNG TI14C5
Dead Opto coupler
SAMSUNG TI 20C5DF2S
Tries to start up with relay clicking then shuts down - vcr sect ok Tda8356 field ic & r303 10r
SAMSUNG T1-20C5DF
Dead Replace ra802 330k in primary
SAMSUNG SCT12B CI5944N
Frame foldover at the top R307 10r 0.5w o/c