Search: samsung
Results: 3847
Make Model Symptom Problem Solution By
SAMSUNG SCT12B
No power up led flashes yellow Check ic901 has 5v supply, osc at pin 31,32 - if no osc sus xtal x901
SAMSUNG SCT12B
Flyback line at top of screen R307 10r
SAMSUNG SCT12B
Failure of tda8350 fop chip Add additional components tv ffinding feb 2000 gives details
SAMSUNG SCT12B
E/w fault - tda8350 chip fails Mod available
SAMSUNG SCT12B
Dead Ic801 (strs6709) & q805 tip102
SAMSUNG SCT11D
Field collapse R410 1r feeding d403 o/c
SAMSUNG SCT11B/D CI3373 CI5079
Dead with dz801 or ic801 s/c If signs of overheating round faulty components - psu produces excess ht in st/by; in st/by 125v ht should rise to 140v but does rise to 180v in some sets. replace dz801 with pt no 0403-000691; ic801 replace with aa13-20004p; hc801 replace with aa13-20004m & if still excessive ht change c852 for 2301-000111
SAMSUNG SCT11B CI5373T
Reduced frame and no video/sound Replace eeprom ic902 (b4000-0135)
SAMSUNG SCT11B CI5373T
Dark pic at switch on, ok after 10 min Loptx (aa26-30001y)
SAMSUNG SCT11B CI5079T
Frame jitter Replace hc301 (aa13-20002w)
SAMSUNG SCT11B CI5079T
Frame collapse R410 o/c
SAMSUNG SCT11B CI5079T
Frame collapse Ic201 ms2309bsp faulty, no drive from pin 18 (1204000431)
SAMSUNG SCT11B
Dead, fuse blown Replace c803 2n2 800v (2303-000163 or a1102-0331), dz801 r2kn (0403-000691), ic801 (aa13-20004p), hc801 (aa13-20004m). note: hc801 and ic801 must be "c" version!
SAMSUNG S51A
Dead - no line dr Ka7630 reg chip
SAMSUNG P85C
Comes on with chirping noise & st/by led on then trips out after ½ min C817 100µ 25v
SAMSUNG P85C
Comes on with chirping noise & st/by led on then trips out after 1/2 min C817 100µ 25v
SAMSUNG P72 CI6229T
Int. dead or when warm wont come on from stby C806 100uf 25v (pin 9 tda4601)
SAMSUNG P72 CI6229T
Frame collapse C808 goes faulty and destroys ic301 tda3654
SAMSUNG P72
Buzzes then off C806 100µ 25v leaky connected to pin 9 tda4601
SAMSUNG P72
Buzzes then off C806 100µ 25v leaky connected to pin 9 tda4601