Samsung Repair Tips
Search: samsung
Results: 3878
Results: 3878
Make | Model | Symptom | Problem | Solution | By |
---|---|---|---|---|---|
SAMSUNG |
CI20S2OBT
|
Dead with 3.15a fuse shattered | C805 2n2 800v | ||
SAMSUNG |
CI20520BT
|
Dead - off with a bang | C805 2n2 800v split | ||
SAMSUNG |
CI1683
|
Int start up | C808 47µ 25v in start up cct | ||
SAMSUNG |
CI1630
|
Won't go to stby | C806 and c808 100uf 25v | ||
SAMSUNG |
CI1537
|
Blank raster takes input from front socket | Tuner u/s | ||
SAMSUNG |
CI1533
|
Dead with whistle | Check c412 for s/c | ||
SAMSUNG |
CI1338X
|
Whining noise | T402 loose windings try cable ties + glue !!!! | ||
SAMSUNG |
CI1338X
|
High pitched whine when heated | T402 pin corr trnsfmr | ||
SAMSUNG |
CI1338/514
|
Small pic varies with brightness | Dry joint e connector 125v of q801 str3125 | ||
SAMSUNG |
CI1338/514
|
Low brightness with washed out pic | Replace r207 120k ½w, r208 127k ½w, c519 330pf 1kv - cap on crt base | ||
SAMSUNG |
CI125R
|
Servicing the goodmans gtv9200/samsung ci125r | See tv mag dec 1993 | ||
SAMSUNG |
CI1213R
|
Dead - psu starts up then shuts down | L110 in ht feed to lop stage dry joint | ||
SAMSUNG |
CI1212R
|
Failure to start | No start up volts to pin 8 ic105 micro. - chip faulty tmp47c433an3842 | ||
SAMSUNG |
CI 3312 CI5013
|
High ht on b1 ( 125v ) line , causing q402 to fail | Check r807 ( 11k ) pt no. samsung 31018177113 - reason : no ip. on pin 3 ic801 for control amp | ||
SAMSUNG |
CF5344N
|
Field collapse & no sound | 12v supply to reg missing - cracks in print | ||
SAMSUNG |
CB7230ZN P72
|
Field collapse | Tda3654 fop chip (tried 3 b4 found one that would work) | ||
SAMSUNG |
CB6833W
|
Dead psu | C808 100µ 25v | ||
SAMSUNG |
CB5373
|
Repeated blowing of smr40200 | Bu508af on a hybrid panel can be used instead (leave pins 1 & 5 dis'd) & change hiso169b, 150v avalanche diode, 33µ cap | ||
SAMSUNG |
CB536Z P45S
|
Rolls aft 2 hrs | R210 240k | ||
SAMSUNG |
CB336F
|
Sound will not turn down. | R604 ( 1r ) o/c. |