Sharp Repair Tips
Search: sharp
Results: 1784
Results: 1784
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| SHARP |
C 2010 B
|
Broken flyback, after changing the flyback the TV opened with a very bright screen, missing 180 volts. it was the power supply resistance that comes out of the open flipback pin. | Replacement of flyback and residtor. tv ok | Eli | |
| SHARP |
C-2053
|
Without red color | Capacitor smd c851 580pf | ||
| SHARP |
C-2013
|
Turns on, normal sound image takes time to appear | R717 amended | ||
| SHARP |
C14S02
|
Dead | C616 | ||
| SHARP |
C 2038
NAO SEI |
Delay for image to appear | Secondary ft 1000mf 25v electrolytic capacitors exhausted | Replaced them and the image appeared along with the sound | koerich |
| SHARP |
C-2188
|
Takes time to call | Possible cause of c666 failure (1uf x100v) | ||
| SHARP |
C-2013
|
Doesn't start | C555 e c720 | Jorge Luiz | |
| SHARP |
2010B
|
Side half of the screen dark | Resistor r 727 | Paulo | |
| SHARP |
C20T51
|
Poor vertical | Diode d501 | Paulo | |
| SHARP |
C-2057
|
No image with sound | Replace c603, c624, c809 , c807 | ||
| SHARP |
C-1453
|
Doesn't work | C617 horizontal collector | ||
| SHARP |
C-1453
|
Doesn't work | If the fuse and q701 are blown, check c727 | ||
| SHARP |
C-1453
|
Doesn't work | Rah0, rahach, rahas (1 t) | ||
| SHARP |
TVC-20R12
|
Turning off protection | Q651 | ||
| SHARP |
C-29ST57
|
Vertical closed | Ic203 diodo zener 33v | ||
| SHARP |
C-29ST57
|
It takes a while for the image to appear, dark screen | From 803 | ||
| SHARP |
C-29ST54
|
Image closed horizontally | C713 | ||
| SHARP |
C-2035
|
Won't turn on, fuse blows | D704 shorted | ||
| SHARP |
54DT25S
|
Short supply does not work | Verificar d718(zener 15v)q702, q703 (bc337) p4nb80=buk444=k1611 | ||
| SHARP |
C2013
|
When it starts to oscillate it turns off | Check vertical ic501 and c504 |