Sharp Repair Tips
Search: sharp
Results: 1784
Results: 1784
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| SHARP |
C14R12
|
Doesn't start | C616 | Edmilson C Castro | |
| SHARP |
C-2041
|
No contrast opaque image | R423 ( 680k ) aberto proximo´s | fabiusmax | |
| SHARP |
TV C- 2041 B
|
TV works but with half screen, vertical closes from bottom to top. | Trcado o c- 1/100 volts | jaironuness | |
| SHARP |
C- 20S57
|
TV works as if everything were weak, in the background you can see retrace lines. | Exchanged c 624 c 603 | jaironuness | |
| SHARP |
C-2013
|
Normal sound dark screen | Fly back and tube socket before exchanging them, measure the screen voltage if it is normal to just change the socket. | ||
| SHARP |
C-2013
|
Normal sound dark screen | Fly back and tube socket before exchanging them, measure the screen voltage | ||
| SHARP |
C2041 B
|
Image without contrast, when the screen decreases the image oscillates | R612-27k open | paulorusso | |
| SHARP |
20R12
|
No characters | R 1047 of 33k open | Daniel | |
| SHARP |
C20R12
****** |
Image without contrast, very dull. | ****** | Trick....clean pin 14 (turn off) and that's it | armando |
| SHARP |
C 2057
C 2057 |
It takes a while for the image to appear with a weak tube symptom | Capacitor c624 3,3mf 50v proximo diodo d601 | Edson Peixoto | |
| SHARP |
C2038
|
Alloy has but b of the power supply but does not oxidize | C.725.47mf.por.160v | julio itaguai | |
| SHARP |
C20T51
|
Contrast saturation | Saturated contrast | walderli | |
| SHARP |
20ST58
|
Alloy 115 c 75v check c725 and 727 47/160v usually burst and lose capacitance | Changed and resolved | Eronaldo | |
| SHARP |
TV 2053
|
Vertical stretched | Dodo zener ic- 104 33 volts aberto | jaironuness | |
| SHARP |
TV C 2038
|
Vertical closed | Changed the vertical outlet tda8356 and r 505 33 homs | jaironuness | |
| SHARP |
2017
|
Closed horizontal | C 617 ( 560 p / 250v ) | JOHN | |
| SHARP |
1453
|
Dead | Trafo drive | Replaced the same TV that worked normally | filipak |
| SHARP |
C2082
|
Does not fully open the vertical strip on both sides of 10 cm at the bottom and top | Change c 507 1000 / 35 volts weak. | jaironuness | |
| SHARP |
C-2053
|
Vertical stretched | Ic104 aberto (diodo zener 33v) | Replace ic104 | ric |
| SHARP |
C20R11
|
Turns on after a few seconds turns off | Unbelievable 33v zener shorted killing the 115v plus b line | Replace do zener 33v (ic 1005) | VAGNER NARDES |