Search: sharp
Results: 1784
Make Model Symptom Problem Solution By
SHARP 1410B
Inoperative: when turned on it made a buzzing noise and stopped. 120v power supply was at zero. Replace the shorted capacitor c 613 (6k8/1.6kv). Note: this is not always the cause of the defect.
SHARP 21ST54B
Inoperative, power supply zero. R725, r726 and r729 (all 1r) were open. q701 (2sk2138) shorted. replaced the defect remained. change IC 701 (tda8380), 115v appeared but the TV didn't turn on. When replacing the q707 (dtc 144), the device started working again. Note: when measuring the Q707 it showed as good.
SHARP VC762
When you press the play command, it turns off completely. (It's a classic blemish, ideal for making your hair stand on end!). Just change the key belt so that it is housed vertically behind the mechanics. Take advantage and change all the belts, the kit is cheap!
SHARP C 2025A
Inoperative. Changed c 626, r 618, r 619, it worked but the image was distorted, left and right side and the capacitors c 710, c 721 were also changed, cap 450v 22mf replaced by 350v 10mf, cap 400v 10mf replaced by 250v 100mf, everything OK!
SHARP TVC2199B
No high voltage 1
SHARP TVC2053
No vertical deflection C618 (470 nf 250 v), r618 (68 r 1 w)
SHARP TVC2053
Dead C713( 1 nf 400 v), ci701 (tda8380) e fet 2sk2139
SHARP TVC2040
Open power supply zener Ci stk73908
SHARP TVC1453
Dead A zener (8.2 v) of the mp101 shorted
SHARP TVC1430A
Horizontal band at the top of the screen C520
SHARP TVC11691/B
Power supply doesn't turn on sometimes C709 (2,2 µf 50 v)
SHARP TVC11690H
Intermittent operation Qah02 (2Sadah13)
SHARP 2040-B
Dead R601 (330 r)
SHARP 14R12
Dead Fly-back e q602 (25d1554)
SHARP C-2030-A
Vertical line, with sound C626 (0,39 µf 400v), r618 (100 r 2 w) e r619 (idem)
SHARP C-2016
Image shaken vertically C509 (220 µf 16 v)
SHARP C-2011-B
A/ red color Q851 (2sc2229)
SHARP C-2010-B
Horizontal line R741 (1 r)
SHARP C-2010-B
Inoperative, fuse open C707 (330 µf 400 v) e r615 (82 r 2,5 w)
SHARP C-2006
The/ image, with/ sound High voltage tripler