Sony Repair Tips
Search: sony
Results: 20073
Results: 20073
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| SONY |
YE2
|
Teletext - no text. | Rv3 ( 100r ) on text pcb goes high. | ||
| SONY |
YE2
|
Stuck on channel 6 no sound or pic | Volume down button sc | ||
| SONY |
YE2
|
No sound or picture - low buzz. | Loptx | ||
| SONY |
YE2
|
No pic sound ok | Ht low at 80v (135v) c652 33µ 250v | ||
| SONY |
YE2
|
No colour | T302 oc | ||
| SONY |
YE2
|
Loses line sync on channel change | D811 , r825 , d810 , r838 all dry jointed | ||
| SONY |
YE2
|
From cold top 2/3 of pic blanked out | C818 ( 4.7uf ) 250v | ||
| SONY |
YE2
|
East west - convergence at sides of screen. | L551 27mh. | ||
| SONY |
YE2
|
Dead. | No 135v supply to pin 4 of plug d1 , s/c bt pins 1&12 of loptx. | ||
| SONY |
YE2
|
Dead - no o/p from psu | R603 390k 1/2w o/c & dry joints d801,2,8 & 9 on line pcb | ||
| SONY |
YE2
|
Blank screen in text | Rv3 on text pcb 100r | ||
| SONY |
XE-5
|
No store chans | Dry joints tuner/if section | ||
| SONY |
XE-4
|
Red & green flashing/streaks/squares & no txt when heated | Saa5243p chip on txt panel soldered directly in (dry joints holder) | ||
| SONY |
XE4
|
Vertical distortion from cold | Resolder field ic and heatsink | ||
| SONY |
XE4
|
Stuck in standby. | Dry on resistor 0.68Ω in l602 location. | ||
| SONY |
XE4
|
Sound varies + hard to adjust | D016 leaky | ||
| SONY |
XE4
|
Sometimes comes on in av mode remote led flashes a | Poor soldering around ir screening can | ||
| SONY |
XE4
|
Snowy pic - low tuner gain | Swaf faulty | ||
| SONY |
XE4
|
Shimmer on verticals worse when warm | Drys on field heatsink | ||
| SONY |
XE4
|
Poor field lin | C527 470uf 25v |