Sony Repair Tips
Search: sony
Results: 20088
Results: 20088
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| SONY |
KV-27HSR10
|
Sometimes it goes out immediately | Q651 (2sd774) was found open | ||
| SONY |
KV-27HSR10
|
Turns off when turned on/control | Change ic701 (mb88201-638l) | ||
| SONY |
KV-27HSR10
|
Does not turn off | C125 leaking. (.0022/50v) | ||
| SONY |
KV-27HSR10
|
Video does not "lock" horiz | C322.1/50v with leaks. (in m/s the temp could be adjusted) | ||
| SONY |
KV-27HSR10
|
The volume neither goes up nor goes down | Bad ic251 (cxa1264s) was found. | ||
| SONY |
KV-27HSR10
|
Video with audio variations | Found c652 100/50v open | ||
| SONY |
KV-27HFR
|
It turns off after half an hour | +b=65v at 135v. ic681 (dm-36) | ||
| SONY |
KV-27HFR
|
Try to catch | I was r505 altered. 130k average 1.2m | ||
| SONY |
KV-27HFR
|
Died. | D686 (zener 18v) was found short | ||
| SONY |
KV-27HFR
|
Loses sync. vert. sometimes | Put in parallel with c502, 0.05/50v | ||
| SONY |
KV-27HFR
|
Vertical instability and horizon | I find c520 (4.7/50v) with leaks. | ||
| SONY |
KV-27EXR10
|
Goes off. no "click" is heard | Ry601 dry. | ||
| SONY |
KV-27EXR10
|
Only channel 3 without color. | Change cm-1301 | ||
| SONY |
KV-27EXR10
|
No video in audio. | If I find leaks in d408 (zener 5.6v | ||
| SONY |
KV-2780R
|
Turns off when increasing the volume | Replace ic101 (mb88505-403n) | ||
| SONY |
KV-2780R
|
Video with interference(malla) | Ic651 (str3035) delivered +b with noise. | ||
| SONY |
KV-2780R
|
Video with "cojin" effect | It was found at r1514 of 39kΩ open. | ||
| SONY |
KV-2771R
|
Does not "engage" channel 3. | Solve to unit fin. (ifb-450m | ||
| SONY |
KV-2771R
|
Intermittent noise sound | If I find the c140 (0.022uf) with leaks | ||
| SONY |
KV-2770M
|
Average consumption data | In standby: 10ma, without signal: 284ma, with signal: 329ma. |