Sony Repair Tips
Search: sony
Results: 20073
Results: 20073
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| SONY |
CDX5070
|
Cd does not play, display reads e-04 | The lcd display of the unit reads e-04. this may be caused bythe cd making contact with the chucking arm (ref# 122). this may cause thecd not to spin and eventually displaying an error message. | ||
| SONY |
CDX5060
|
Cd does not play, display reads e-04 | The lcd display of the unit reads e-04. this may be caused bythe cd making contact with the chucking arm (ref# 122). this may cause thecd not to spin and eventually displaying an error message. | ||
| SONY |
CDX4090
|
No speaker outputs from unit | No speaker output. | ||
| SONY |
CDX4090
|
Cd skips | Cd skips when playing. | ||
| SONY |
CDX4090
|
Unit has skipping problem | Cd skips. | ||
| SONY |
CDX4090
|
No sound | No sound. | ||
| SONY |
CDX4090
|
Cd does not play, display reads e-04 | The lcd display of the unit reads e-04. this may be caused by the cd making contact with the chucking arm (ref# 122). this may cause the cd not to spin and eventually displaying an error message. | ||
| SONY |
CDX4050
|
Cd does not play, display reads e-04 | The lcd display of the unit reads e-04. this may be caused bythe cd making contact with the chucking arm (ref# 122). this may cause thecd not to spin and eventually displaying an error message. | ||
| SONY |
CDTRV21
|
Poor focus on evf (found focus ring on crt mounted poorly) | The unit had poor focus on evf. found problem to be caused bythe focus ring being hot-glued to the crt at an angle which preventedgood focus. this apparentlt occurred during manufacturing. | ||
| SONY |
CCDTRV21
|
Washed out pix (found iris stuck open, cold solder cn-101) | The picture was washed out. found problem to be caused by astuck iris. cold solder on cn101 of the cn-98 board resulted in the irisbeing stuck. | ||
| SONY |
CCDTRV21
|
No pix in evf, only vertical line (found bad solder on l903) | Evf had no horizontal scanning, resulting in only a vertical line display. problem was found to be caused by bad solder on l903 on the vf-102 board. | ||
| SONY |
CCDTRV21
|
Door won't close (mode switch bad, mech did not eject fully) | Cassette door would not close, because the mechanism did notfully eject the last time the tape was ejected. found problem to becaused by a faulty mode switch. | ||
| SONY |
CCDTRV21
|
No eject (found tension reg. ref 833 was jammimg ls chassis) | The unit would not eject the tape. found problem to be causedby the tension regulator plate which had come loose and was jamming the lschassis. | ||
| SONY |
CCDTRV21
|
Np ff or rew (found tear in fp249) | The unit would not rewind or fast forward. found problem tobe caused by unit not sensing movement of the supply reel. this wascaused by a bad conection on fp249, caused by some sort of contact with asharp edge. | ||
| SONY |
CCDTRV21
|
No zoom (found tab which follows worm gear dislodged) | Lens would not zoom. after removing the zoom motor found that the inner tab which follows the worm gear on the motor shaft has twisted,preventing proper engagement with the worm gear. | ||
| SONY |
CCDTRV21
|
Drum is unusualy noisy (tightened 3 screws inside of drum) | Drum made rubbing noise while spinning. after removing thebottom plate of the drum assy, found the 3 inner screws loose. | ||
| SONY |
CCDTRV21
|
No color in rec, e-e ok, pre-rec ok (found x701 bad) | Unit would not reord color. e-e color and playback ofpre-recorded tape color were ok. found problem to be caused by x701 whichwas not put together properly. | ||
| SONY |
CCDTRV21
|
Intermittent no power (found cold solder on j1 on dd-80 mcb) | Unit was intermittently dead. found problem to be caused bycold solder on j1 of the dd-80 mcb. | ||
| SONY |
CCDTRV21
|
Ejects after trying to load (ref 771 was jammed on ref 752) | After trying to load (with or without a tape) the unit wouldgo to eject mode. problem was found to be caused by the pinch rollerassy, ref. 771, slipping over the base of the take-up guide assy., ref.752, causing these 2 parts to jam with each other. | ||
| SONY |
CCDTRV21
|
Eats tapes (found tg4, ref. 765, was bent) | Unit would eat tapes. found problem to be caused by tg4, ref.765, being bent. |