☰

Vestel Repair Tips




AIWA
BEKO
CCE
CINERAL
DAEWOO
FUNAI
GRADIENTE
GRUNDIG
HITACHI
ITT
JVC
LG
MITSUBISHI
PANASONIC
PHILCO
PHILIPS
PIONEER
RCA
SAMSUNG
SANYO
SHARP
SONY
THOMSON
TOSHIBA
VESTEL


Search: vestel
Results: 169
Make Model Symptom Problem Solution By
VESTEL 17MB62
17MB62 		Writer's ice Reinstall software if power supply voltages are ok Mário Martins
VESTEL 17MB63D
17MB63D 		Backlights don't work Check q41 Mário Martins
VESTEL 17MB65
17MB65 		Backlights don't work Check q27 Mário Martins
VESTEL 17MB65
17MB65 		Backlights don't work Check q15 Mário Martins
VESTEL 17MB80
17MB80 		LED flashes continuously or flashes 10 x Tsound is a short or excess consumption on the main board Update firmware Mário Martins
VESTEL 17IPS19-5
17IPS19-5 		When turned on, the light appears on the screen and the LED flashes Check d206 and d207 Mário Martins
VESTEL 17IPS06
17IPS06 		Does not come out on stand-by Check c882 c883 Add 100k resistance in position c884 which is empty Mário Martins
VESTEL 17IPS06
17IPS06 		Does not come out on stand-by Check r854(1k) Mário Martins
VESTEL 17IPS02
17IPS02 		Does not come out on stand-by Check r854(1k) Mário Martins
VESTEL 17PW26
17PW26 		Does not come out of standby Check r818 and r819 Replace to 620k Mário Martins
VESTEL 17PW20
17PW20 		Without 24v at the power supply Check q815 and q816 If tsound is a problem on the 24v line, it goes into protection, q802 will have 0 (zero) volts Mário Martins
VESTEL 17PW20
17PW20 		Without 12v at the power supply Check q827 Mário Martins
VESTEL 17PW20
17PW20 		Check ic825 Mário Martins
VESTEL 17PW20
17PW20 		No 5v at the power supply Check q832 Mário Martins
VESTEL 17PW20
17PW20 		Check d821 Mário Martins
VESTEL 17PW20
17PW20 		Doesn't start Fuse open, q803 shorted Mário Martins
VESTEL 17PW07
17PW07 		Turns off by itself R428(2k2) Mário Martins
VESTEL 16MB5000S
16MB5000S 		On screen lnb is overloaded Ic501 Mário Martins
VESTEL 16MB5000S
16MB5000S 		8888 appears on the front panel Check c614 and c605 Mário Martins
VESTEL 16MB38
16MB38 		Doesn't work, correct power supply voltages Check cold solders on ic2 and ic603 As a guarantee, resolder the ics and check if tsound are other faulty welds Mário Martins