Repair Tips
Search:
Results: 87721
Results: 87721
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| SONY |
CCDV3
|
No camera video - playback ok | No video from camera, playback ok. camera video looks as ifhoriz. sync. freq. is off, but flashes bright sometimes. found x721on vc-20 board not oscillating. | ||
| SONY |
CCDV110
|
No playback video | No video on playback. appeared to have defective video heads.rf output from heads, and head amp normal. found loss of gain in q227 onvi-21 board. | ||
| SONY |
KPR36XBR
|
No left channel, resoldered ic5008/pin 7 | One speaker dead. | ||
| SONY |
WMF77
|
Audio cuts out with movement | Audio cuts out with movement. | ||
| SONY |
WMF77
|
No audio in right channel | No audio - right channel. | ||
| SONY |
CFSW440
|
Inoperable play button | Play button not working. | ||
| SONY |
CFSW360
|
Eats tapes | Eats tapes. | ||
| SONY |
KV2792R
|
No sound, resolder t-801 | No sound. pix ok. | ||
| SONY |
CCDV110
|
Camera would flash bright/dark | Video from camera had what appeared to be incorrect horiz.freq. and would flash bright/dark. playback from vcr section ok.found x701 on the cp-18 board had no cw output. the output pulsed, butwould not ring. | ||
| SONY |
CDP510
|
Skipping on first track | Stock unit. skipping on first track. found sled drive vol-tage going to 1.8v-2.0v before the sled would move. loosened sled motorholding screw and repositioned worm gear to open meshing with sled gear.now drive voltage goes to 0.6v and sled moves smoo | ||
| SONY |
CCDV110
|
Multiple image in viewfinder and poor sound | Multiple image in viewfinder and poor sound. | ||
| SONY |
CCDV110
|
Unit would not power-up | Would not power up. | ||
| SONY |
CDP510
|
Disc will not clamp after loading | Breakage of chuck arm and loss of chuck arm roller. | ||
| SONY |
TCR302
|
No recording from one channel | No record one channel. found record level control rv301 open. | ||
| SONY |
TCW530
|
Record level will not set from tape | Record level will not set from tape, everything else ok. | ||
| SONY |
XR27R
|
Right side dead | Right side dead. | ||
| SONY |
CDP55
|
Unit skips | Transformer buzzing and unit skips. | ||
| SONY |
CPD1302
|
Dead | The +15v, +24v and +80v are loaded down from the d3 connectoron the d board. only voltage present is the vcc voltage. the 24 voltprotector d5001 is leaky. | ||
| SONY |
SLHF900
|
Am interference (1340 khz) | A customer lives about 1/2 mile from am radio station broad-casting at 1340 khz. the unit is displaying diagonal color lines whenplaying back an off-air recorded signal. -hq comments: i am sending you an ac noise filter and a video headshield cover. p | ||
| SONY |
SL5000
|
Tantalum capacitor failure | Upon installation of tantalum capacitor kit as per s/b #276c54 becomes leaky after about one week. this is the third such unit inabout one month that has done this. |