Repair Tips
Search:
Results: 88103
Results: 88103
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| PHILIPS |
20PT3336
|
Short fly-back | Fly-back | Replace o fly-back jf0501-19865 | Sinailson furtado |
| SAMSUNG |
UN32D4000
|
LED blinking and won't turn on | Power supply board capacitor c806 | Replace it without testing | Rocha |
| LG |
49LJ5550
|
Does not connect wifi | Adapter with error or oxidation, shows as wifi disconnected | Open the device, disconnect its network card, reconnect the device with the adapter disconnected, disconnect the television again and reassemble everything again. wifi will return normally | Saltech |
| PHILCO |
PH21MSS
|
Turns on, image appears and turns off and the LED blinks | Replace resistor r816a 390r, r818 820r, cap c833, c835, c847, c826, q802 coloquei mpsa42 | DJ PITUKA | |
| CCE |
TV-2118USP/AV
|
Carbonized capacitor | C417, c430 | Replace c417 from 331k c430 222k | Sinailson furtado |
| LG |
14FK3RB
|
TV did not start the vertical deflection, even though it had 28 V and the new CI. | R313 - 47k this resistor delivers the vertical frequency so that the integrated can oscillate the bulbine. | Replace the same. (edfesom:) | EDFESOM |
| CCE |
HPS-2198B
|
Turns on and off and the LED just blinks +b normal | Crazy d813 was giving resistance to both sides | Just replace and go for a hug "good luck" | |
| PHILIPS |
21PT9467C/78
|
Pestle effect | Pestle effect | Cold soldering on q303 | Eletrônica do Arleans |
| AOC |
LE39S5970
|
Doesn't start | Added component of the tips above | C 9103--> 100k x 2kv | oskarala |
| BUSTER |
HBTV 32D03HD
|
It doesn't turn on, 5 volts drops until it reaches zero | Open zener diode,zd908 | julinho da eletronica | |
| BUSTER |
HBTV 32L30HD
|
It doesn't turn on, 5 volts drops until it reaches zero | Open zener diode,zd908 | julinho da eletronica | |
| PHILIPS |
191TV4L
|
Does not turn on, only with LED on, standby | Change the capacitors c9310 and c9314, I put 16v 470uf, because the ones that come are no good. | Luan Menezes | |
| LG |
29LN300B-PC
|
Standby LED flashes and the TV doesn't work | Q1002 (smk630) feet heating, closing short and tripping the power supply | I also made the adaptation with a normal irf630 in place and it worked perfect | Nike |
| LG |
14 POLEGADAS
MC-059A |
Reduced frame on the power supply sides with 90 volts even after changing the photo | Resistor r844 next or photo acp. | Replace it and the ball show was resolved on the spot! | GENILSON OLIVEIRA |
| LG |
29FU1RL-L1
CW-62C |
Dead | Strw6556a, c808, r845, zd402, q830 e ic802 | Mr. Tecnico | |
| SAMSUNG |
CL21Z30
|
Erases the image after a few minutes. | Flay- variando no screen. | Ajustar screen | ELTON CASTRO cabo-pe |
| PHILCO |
PH21MSS
|
Liter at the top of the screen by doubling the image | Capacitor 307 de 100µf/35v | Replace the same | Cassiano |
| AKASA |
AK-B350 BK
|
Power supply does not turn on | Transistor q2 ksh13009al em curto | Q2 swap | PYMO |
| BUSTER |
HBTV-32D05HD
|
The blue LED turns on or off, it doesn't turn on | Replace the swollen capacitors and resolder and clean the ends that go into the lamp connectors | Eletrônica Cecé. Brumadinho MG | |
| SAMSUNG |
14CLC600K AA41-01324E
|
Alloy without image, without OSD, without sound and with retrace lines | D207 9v1 on the rgb line, killing the voltage. | GDP2 |