Repair Tips
Search:
Results: 88115
Results: 88115
Make | Model | Symptom | Problem | Solution | By |
---|---|---|---|---|---|
CCE |
HPS 2071
34BI |
LED was just blinking secondary power supply + pulsing it was only giving 70v dc | TV hand could oscillate due to lack of 103 v in the choper's secondary that goes to the horizontal output | In my case, it was just to replace the capacitors c825 of 47μF for 160 v and c 829 of 33μF for 160v and run to the hug, God and faithful | eletronica sto ant rj |
CCE |
HPS 2071
34BI |
Image disappeared and then came back, it was just a blue screen, tuning and no channel input, I changed varicap q101 and nothing image came and came back | The 5v was missing after it was turned on for a while, that's when I decided to change dz102 5v1 d1011n4148 and c 107de 470uf for 25v and it was fine | Replace without testing dz102 d 101 e c 107 God is faithful | eletronica sto ant rj |
SONY |
KDL-46EX505
|
Turns on, lamp flashes and goes off, normal sound and video, backlight off. | Defective power supply board transformer. replace power supply board for another tested one. | The power supply transformer makes a loud humming sound, replace it or the entire power supply. | Maike SR |
PHILCO |
PH21MSS
|
Greenish image | Defective image tube a51cpac00x01, I changed the image, it came back in color | Defect resolved | Andre |
MITSUBISHI |
TC2010
|
Bad sound on the channels. like it's out of tune. in av normal sound. anomaly in the sound only in the channels. | Capacitor c304 de 1mf/50v. | If you pick it up, the sound improves. By changing it, it solved the problem. | Romildo Behrend |
HBUSTER |
HBTV-32D05HD
|
No audio | After changing the swollen capacitors and resetting the audio it became intermittent, just place a 100Ω resistor in parallel with the d15 close to the audio output on the main board | Defect resolved | Jonas Canal 6 |
AOC |
LE26W154
|
I'm a year old | C651 - 100uf 35v tufted and depleted, I changed it, sound returned to normal | Defect resolved | Andre |
AOC |
LE26W154
|
Low and rocky sound | Change the electrolytic capacitor 100uf 35v depleted, I changed the sound and it was normal | Defect resolved | Andre |
AOC |
LE26W154
|
Dark screen, burning bar LEDs | This TV arrived at my workshop with the following defect, it turns on normally, it has sound, the image is half dark, I changed the LED bar, some LEDs burned out, I replaced it, I decided to check this defect, it was the display board wsound it takes the flat cable that feeds the LEDs, I found u901-max16814b in short and close to this ci to 4 smd mosfet transistor that releases a 12v voltage q905,q906,q907 and q908 bss123 - code sa they are leaking and short, I changed it, it didn't burn but the smd leds | Defect resolved | Andre |
AOC |
LE26W154
|
Function key does not work menu and vol+ | This TV arrived at my workshop with the following defect, it turns on normally when the volume goes up, it doesn't increase, just press the vol key -, in the menu it also says the same problem, I checked the 3k3, 2k and 2.4k resistors are all tsound, all the keys smd touch devices are good, I checked the broken track, nothing, analyzing the schematic I heard a factory defect instead of the 3k3 smd resistor, it was supposed to be 1k, I decided to change the resistors near the menu touch key and vol+ smd 3k3 I put 1k, the volume worked increase and menu worked | Defect resolved | Carlos |
SEMP |
32L2600
|
Does not turn on, LED blinks twice and stays on again. | 10uf smd c 49 capacitor shorted on the v-com board, close to diode d6. | After changing the TV ok. | George Pontes |
LG |
42LD460
|
Do not tune the channels | Change the varicap | Checked the voltages and capacitors, if the coils were not short, everything was ok, the varicap was replaced and the TV worked perfectly | Carlos Cemag |
LG |
21FU6TL
|
Doesn't start | Capacitors in positions c25 and c 515 shorted | Exchanging them | Airton Filgueira |
PHILIPS |
20GL1045
20 |
TV with sound and no image | Open 2010 capacitor and cold solder. | Replace the 2010 25v 100μF capacitor and resolder the board. | Trafo elêtronica São Geraldo MG |
PANASONIC |
SA-AKX220LBK
|
Device does not turn on | Shorted smd diode and burnt ci tps54240 on the right side of c1021 on the main board | Replace smd diode and ci 54240 | Santose2 |
PHILCO |
PH28S63D
|
League has sound no image | All the LEDs shorted, I replaced them all and I also changed the power supply to a toasted L6 coil and leaky MOSFET, the original is not sold. | Defect resolved | Carlos |
SEMP |
TV2934
|
TV doesn't turn on low voltages, it just makes a noise from the speakers | Q604=2sa1013 | Replace it with another and run to another | Antonio Carlos (Eletrônica Renascer) |
PHILCO |
PH32B FSP180-4H02
|
Dead power supply, doesn't work | Dead parts: ec1(100uf/450v), q5(5n50), q6(5n50), f1 (4ah 250v) fuse. | Also check: c5 (10μF/35v), c36 (10μF/35v), c14 (47μF/35v) and d1 | Kaya Elektronik09 |
PHILIPS |
42PF9945
|
Power LED (red) lights up but does not turn green, the TV does not turn on. | Check the two 68r/5w resistors in the power supply | Mário Martins | |
TOSHIBA |
TV2934
|
Colored cup effect, it looks like a colored cone with black edges | 200 megaΩ leaky diode | Replace without forehead d306, d305, if that doesn't solve it, replace the vertical output ic301 la78141 | HAHNRAHN |