Cce Repair Tips
Search: cce
Results: 4815
Results: 4815
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| CCE |
TV LCD32 D32
|
Power supply did not arm | Cold solder at the power supply close to the transformer | fabiusmax | |
| CCE |
HPS 1430
1430 |
Poor vertical deflection | I'm sorry, I'm sorry | Resolved | ELETRO LUIS |
| CCE |
HPS 1470
1470 |
Strong buzzing at the power supply | I replaced the r804 with a 1k5 resistor | Resolved | ELETRO LUIS |
| CCE |
TV-29USP
|
Shaking image | Scrrem was very open | I just adjusted it and it was ok | paulo morato |
| CCE |
HPS2171
|
Image switching between plain screen or with image | R 205 (270 r smd)open or with cracked solder | Resolder or replace note; it is below the cf 201 | antonio nobrega(patos pb) |
| CCE |
HPS2197FS
|
Screen closed on both sides, when the image appears it triggers protection, it keeps turning on and off | Changed the capacitor c 825 solved | nicodemos aires ES | |
| CCE |
HPS-2002-2003-2004
|
It doesn't turn on, press the power LED turns off, press it again, it stays off @@@ | Change c835 it measures correctly in the test | Help yourself, leave your tip ass.arni | ELETRONICA ARNI-LEOBERTO LEAL-SC |
| CCE |
HPS-2002-2003-2004
|
Does not turn on standby led off dead power supply no voltage @@@ | Diodo dz801 smd 18v e r802=1k5 smd | Help yourself, leave your tip ass.arni | ELETRONICA ARNI-LEOBERTO LEAL-SC |
| CCE |
HPS1470Z
|
Won't start - fly moans - has +b | C733 470x35v short | Replace capacitor | matieski |
| CCE |
HPS2071
|
V doesn't tune in. all tensions ok. appears to be seletronic with defect | C102 smd 102 | Replace c 102 smd / you can put ceramic in place | tecnardi |
| CCE |
HPS-2181
|
Doesn't work. | Secondary power supply of 120 volts and 18 volts showing zero. | Solution: r 807 (56r), r829 (330r), r833 (56r). | Nedson |
| CCE |
HPS-3407 FS
|
Activating protection. | Change without measuring q802, q805, c834, c835 and c836. | FERNANDO S | |
| CCE |
HPS-1402 B
|
Burning horizontal outlet | C415 4.7 160v | Replace for a new one ok | ELETRONICA BIANCA IPIRÁ BA |
| CCE |
HPS 2185FS
|
Horizontal does not oscillate, i.e. the TV does not turn on, it just remains on standby. | Faulty sound output ci | Replace ic 601 | AFONSO SANTANA |
| CCE |
HPS 2071
|
Turns on and then turns off, screen blurred 12v power supply at zero | Q802 changed between collector and emitter | Replace q802 | AFONSO SANTANA |
| CCE |
HPS 1407
|
The TV turns on only with the stand-by LED on and with a high power supply of around 150v. | High power supply ic 802 and dz 805de 4v7 faulty, does not connect open transistor q802 between base and collector. | Replace all damaged components and the TV works normally again. | AFONSO SANTANA |
| CCE |
HPS-2002-2003-2004
|
Does not turn on stand-bay led off without b+ ov @@@ | Just change the c812=47ufx25v | Help yourself, leave your tip ass.arni | ELETRONICA ARNI-LEOBERTO LEAL-SC |
| CCE |
HPS1403
34B1 |
Inoperative (led does not light) | Change c807 or c805 open | beto eletronica | |
| CCE |
2971N
|
This TV arrived sound without generating it, it turned on the stand bay but it didn't arm, I measured the voltages and I suspected the capacitor c 826 as it didn't accumulate anything, I removed it from its place and it was dead | Replace capacitor c 826 470mf 400v | moroni eletronica | |
| CCE |
HPS 1471
14" |
On, off, vertical closed | Dead or low 8v line | 8v line regulator q804 (bc337) it is also possible to replace the q802 (reg. 3v3) | Miojex |