Search: cce
Results: 4825
Make Model Symptom Problem Solution By
TV CCE HPS 2073
This TV turns on normally, but with a blue screen and retraces and it doesn't turn off either with the control or the power on the panel. With the blue pin on the micro stuck, the other voltages r and g are set to zero. When I release the pin they appear. I resolved the defect, replaced the micro and the TV was great! BF.COLATINO
CCE HPS1407
HPS1407
TV didn't even tune to one channel Q401 transistor ozenildo
CCE HPS 2981
Running away from tune Change the capacitors of coils t103 and t102 Values ​​for the capacitors in the coils. t 102 put 33pf t103 16pf itan (cabeça)
CCE HPS-2070-2080-2081
TV doesn't turn on b+ ok with 103v when turning on the stand bay the LED keeps blinking @@@ Flaybek tat2006 Help yourself, leave your tip ass.arni ELETRONICA ARNI-LEOBERTO LEAL-SC
CCE HPS-2070-2080-2081
TV doesn't turn on b+ ok with 103v stand bay LED off @@@ Q401 = bf422 horizontal ELETRONICA ARNI-LEOBERTO LEAL-SC
CCE HPS2907 FS
Power supply with noise ticking, ticking and after turning off the load of the +b 132v power supply varying the voltages of the +b132v. Short d 808 and or d812 of +b 14.5v Bruske
CCE 2070
TV has 115v and does not oscillate. Crystal x701 barbosa
TV CCE HPS2071
This TV has a black band on the left side of the image, I entered its service mode to try to adjust it but no bit changes this adjustment Solved, the problem was the c405 with 2n2 smd is on the side of the chip, and then when I turned it on the sound only hissed through the tuner and in AV it had normal sound so it was the c601 with 1n2 smd on the side of the chip. bf.colatino
TV CCE HPS 2001 G
Looking at the power supply, I measured the voltage of the +b and tsound was no voltage on it and I also replaced the c842 and c843 without success. The defect was in c 411 on the horizontal line, it was open, it was just replaced and the TV was fine. bf.colatino
TV CCE HPS 2198
This TV is as if the volume key was pressed, I fixed it, I checked with the test on the x1 scale if the key was acting up, I followed the path to the computer and found nothing. I removed the volume key - and replaced it with a new one, it was fine for a few days and then returned with the same defect Hi, I replaced all the touch keys and it was fine. bf.colatino
TV LCD CCE TL360
Defect: inoperative Checking the power supply output voltages on the connector terminals (cn401) I did not find the values ​​marked tsound, checking the components on the power supply board I found d806 (sr510) shorted which killed the output power supply Replacing it with another diode - with the same characteristics, the TV started working again. bf.colatino
TV CCE HPE14RD
Friends, this TV arrived at the workshop with the following defect: when I turn off the deflector it turns on normally, but when I turn it on The TV's defect was the flash back. bf.colatino
TV CCE 2918USP/AV
This TV had a 10cm dark band on the left and protection was working. When searching, I found the c402 330pf /2kv damaged. After replacing it, the TV returned to normal. bf.colatino
CCE HPS 2991FS
Replace of the same 10v zener diode dz811 (shorted) Replace of the same julio almeida
CCE DVD-757X
Off C111 1000uf 16v Replace ELETROCLAUDIO AGUAS BELAS
CCE HPS 2070V
I'm sound Transistor q 403 shorted Truck q 403 bc547 ROBSON FABIANO
CCE TV2918USP/AV
1107283501
Dark band on the left C 302 / 330pf broken medeiros
CCE HPS2071
Does not tune channels 33 volts are missing from the celetronic Review, dz101 (33v), r106, r107, r108, ​​r109 (all 12k) johnny busnadiego
CCE HPS 2002 E 2003
Retrace lines across the entire screen, the screen does not obey... Fr- 901. tube plate. Perse
CCE HPS 2003
White stripe on the left side, characters at the top and bottom cut off, flickering in the image, noise as if it were being high. Cap- 825, 47x160 Perse