Cineral Repair Tips
Search: cineral
Results: 427
Results: 427
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| CINERAL |
TC 1411
|
Dead | I701 (micro) | Replace the micro | Tecvideo |
| CINERAL |
PL-2110
|
Turns off after a few seconds or minutes | Q103 | NUNO RJ | |
| CINERAL |
TS 2977
|
Turns off some time after turning on or turns on whenever you want. | Causa: c116 (330uf/50v) | ||
| CINERAL |
PL2110
|
Excess horizontal width | C227 (10uf) replace with 22uf/105º/(63v or more) it is important to be 105º as the 85º ones in this position get too hot. | ||
| CINERAL |
2910P
|
Everything works fine at 220v at 110v tsound is no sound | Check c530 c532 | ||
| CINERAL |
PL2910
|
Image interference | Silly, disgusting | ||
| CINERAL |
TC-1411
|
Str50103 faulty in 220v networks | 1- change c608 from 0.047uf x 200v to 0.015uf x 250v 2- replace 22Ω r804 with 51Ω or 47Ω / 3w 3- replace 10Ω r805 with 51Ω or 47Ω / 3w 4- on the side wsound r805 joins c812, solder the anode of a ske4f 1/04 diode, connecting the cathode to the positive of a 220 uf x 250v electrolytic capacitor, connecting its negative to a nearby ground. 5- in parallel with the electrolytic capacitor, install a 2.2 kΩ resistor 6- add a bigger heatsink to the str | ||
| CINERAL |
C1420
|
Does not oscillate | Q806 | ||
| CINERAL |
PL-2910P
|
Image interference | C525 e c532 | ||
| CINERAL |
TC-1411
|
Vertical closed | Qa02 | ||
| CINERAL |
TC-1411
|
Dull | Stop07. | ||
| CINERAL |
2110PL
|
Doesn't work | Q103 open, which takes the 3v3 to the micro. | ||
| CINERAL |
TC 14/2022
|
No characters | R704 | ||
| CINERAL |
29P-CIN0507
|
Color changing from colorful to black and white alternately | Enter service mode and menu option 7 changes optm1 to ta 40 change to 62 | Adriano,rio verde,MS | |
| CINERAL |
CIN-0401
|
Does not turn on, LED flashes | Open smd resistor in the power supply primary | Replace of r 825 10k | ALEX/FETTER |
| CINERAL |
TC 1433UN
|
Blinking LED does not turn on | Q-202 | saffier | |
| CINERAL |
TS2933N
|
Vertical closing at the bottom with linearity at the top | C321 1mf | WILSON | |
| CINERAL |
TC-2011-1411
|
Voltages were all normal but it didn't turn on | The power key was shorted and for this reason the computer was already frozen, not performing any function including turning on the TV. | Replace power key sw01. | |
| CINERAL |
TC2033NU
|
Screen full of retractions from top to bottom of the video, as if it were the vertical ci or capacitor. | It was d201=1n4148 and r202=1r5 all broken. I replaced it and the TV worked normally. | ELETRÔNICA MELO BOA VIAGEM -CEARA | |
| CINERAL |
29P CIN0507
|
Turns off after some time | Change all micro switches on the control panel. | Ademar Videira sc |