Cineral Repair Tips
Search: cineral
Results: 427
Results: 427
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| CINERAL |
21PCIN0305
|
Does not turn on, LED is off. | When doing tests on the secondary, I saw that all voltages were zero, so I decided to change the IC801 power supply regulator and the TV started working again. | Replace ic801 in the power supply | MARCONES DE ARARIPINA-PE |
| CINERAL |
21PCIN-0405
|
When calling, a written message appears on the screen with the device's features. | To deactivate, click on "calendar" on the remote control and observe that the little envelope on the bottom left will appear as open. Click "ok" on the remote control to save. | Carlão | |
| CINERAL |
21P CIN-0405
|
Turn on turn off | Replace s8550 tea2025 | Replacement | fco vila rica -mt |
| CINERAL |
CIN-0401
40-EV13SP |
Does not work, only stan-by LED on, +b 76v power supply | Defect in horizontal drive stage | Q 401 with leak | ALEX/FETTER |
| CINERAL |
TCPL 2955
|
TV turns on then turns off and stays on stand-by | Electrolytic capacitor position c-251. 4.7uf x 50v. | TALL-TEC Eletronica Rio Branco MT. | |
| CINERAL |
TC 1470
|
It works for a while and turns off. | Replace ic-103 regulator (7805) replace transistors q-102 -q-103 and c-215 (330pf) | Ademar Videira SC | |
| CINERAL |
CIN-0507
|
Works and turns off after some time on. | Change all micro keys. | Ademar Videira SC | |
| CINERAL |
R-FLAT2166
|
Purple red green spots | Utpc burned | Replace new utpc | Eletronicaalmiro |
| CINERAL |
1470
|
When turned on, it activates protection and returns to stand by. | Q 102 and q 103 at the power supply. | Replace the transistors (bc 635 and bc337). | Rondy-Campo Redondo/RN |
| CINERAL |
14N CIN -0401
|
No image, black screen | R514 and r515 both open | Replace r514 and r515 | |
| CINERAL |
TC2070
|
Turns off by itself | Transistor q102(bc635) | ||
| CINERAL |
TS2977
|
Doesn't start | Regular open power supply | Place no place 5q0765rt | ELETRONICA MAURI JUNIOR |
| CINERAL |
29- CIN-0507
|
Turns off for no reason. | Change micro keys | Ademar - Videira SC | |
| CINERAL |
29P-CIN0507
|
Color changing from colorful to black and white alternately | Enter service mode and menu option 7 changes optm1 to ta 40 change to 62 | Adriano,rio verde,MS | |
| CINERAL |
CIN-0401
|
Does not turn on, LED flashes | Open smd resistor in the power supply primary | Replace of r 825 10k | ALEX/FETTER |
| CINERAL |
TC 1433UN
|
Blinking LED does not turn on | Q-202 | saffier | |
| CINERAL |
TS2933N
|
Vertical closing at the bottom with linearity at the top | C321 1mf | WILSON | |
| CINERAL |
TC-2011-1411
|
Voltages were all normal but it didn't turn on | The power key was shorted and for this reason the computer was already frozen, not performing any function including turning on the TV. | Replace power key sw01. | |
| CINERAL |
TC2033NU
|
Screen full of retractions from top to bottom of the video, as if it were the vertical ci or capacitor. | It was d201=1n4148 and r202=1r5 all broken. I replaced it and the TV worked normally. | ELETRÔNICA MELO BOA VIAGEM -CEARA | |
| CINERAL |
29P CIN0507
|
Turns off after some time | Change all micro switches on the control panel. | Ademar Videira sc |